【Important】
To use the firmware Ver.1.19, PJP-25UR Controller must be updated to Ver.1.23. By downloading and running the above-mentioned updater, "the firmware and PJP-25UR Controller" can be updated simultaneously. If PJP-25UR Controller is Ver.1.21 or older, it is not possible to update the firmware to Ver.1.19 or later versions.
Firmware Version 1.19 (updated: Jan. 13, 2009)
The behavior stability has been improved when using simultaneously with other USB devices which require a lot of frequency.
When using the control application, Ver.1.21 or older versions are not usable.
The main unit restarts by changing the mode between “Mic & Speaker” and “Speaker” on the control application.
When switching the mode between "Mic & Speaker" and "Speaker", connection failure to active applications (e.g. Web conference system, media player) or behavior failure may occur. Close the applications beforehand.
- While “Wide” or “Mono” is selected in the “Speaker” mode, if the mode is changed to “Mic & Speaker”, and then returned to “Speaker”, “Stereo” is always selected.
- When “Mic & Speaker / Speaker” is assigned to the short cut function, if you disconnect the USB cable and then connect it again while the “Speaker” mode is selected, the unit starts with the “Speaker” mode.
When canceling the microphone mute function while the “Speaker” mode is selected, the main unit restarts.
PJP-25UR Updater
Updates / installs the firmware and control application of PJP-25UR.
If the control application has been already installed and firmware update is not required, it is possible to update only the control application.
PJP-25UR Controller application Version 1.23 (updated: Jan. 13, 2009)
When updating the firmware to Ver.1.19, also the controller application must be updated to Ver.1.23.
On the firmware Ver. 1.19 or later, the confirmation massage for restarting PJP-25UR appears, when switching the mode between “Mic & Speaker” and “Speaker”. The mode is changed only if an acceptance is obtained.
The confirmation massage appears when the following operations are performed.
- when "Mic & Speaker" on the application is pressed
- when "Speaker" on the application is pressed
- when the mode has been changed on completion of the wizard on the application
- when the microphone mute function is canceled on the application while the controller is in the "Speaker" mode
* The massage does not appear when performing with the shortcut function of PJP-25UR or on the OS.
A dialog appears while PJP-25UR is restarting.
The dialog appears in the following cases.
<If the firmware of main unit is Ver.1.10-1.18>
- when “Mic & Speaker Control via USB” is changed
- when restart is required due to reset
<If the firmware of main unit is Ver.1.19>
- when “Mic & Speaker” on the application is pressed
- when “Speaker” on the application is pressed
- when the “Speaker” mode is changed by using the shortcut function of the main unit
- when “MIC MUTE” on the main unit or application is pressed while the controller is in the “ Speaker” mode
- when the mode has been changed on the completion of the setting wizard
The dialog disappears when the window of controller is hidden or the control window is initialized due to the detection of PJP-25UR.
Version 1.17 (updated: Aug. 25, 2008)
Echo Canceller has been improved.
The “Environment” setting has been added. (The “Echo Canceller Effect” setting has been discontinued.)
- In the "Environment" setting, you can select between "Normal" and "Conference Room".
- Normal: Select this mode when using in an office or open space.
- Conference Room: Select this mode when using in a relatively quiet environment. This mode is highly-sensitive and picks up the audio from a larger area.
The “Environment” setting can now be configured by the keys of the PJP-25UR.
- Pressing MENU/PC and VOLUME – at the same time switches the “Environment” setting to "Normal" and the middle LED blinks for three seconds.
- Pressing MENU/PC and VOLUME + at the same time switches the environment setting to "Conference Room" and all the three LEDs blink for three seconds.
The microphone sensitivity has been optimized to make the audio clearer.
- The microphone sensitivity has been lowered in default configuration in order not to pick up the audio more than necessary.
- If you need the microphone sensitivity which is equivalent to 0dB of Ver. 1.13 or before, drug the slider bar to the following position in “Mic level” of the PJP-25UR Controller.
- When using in "Normal": One scale (large dot) higher from the center
- When using in "Conference Room": Near the center
For details, refer to “User’s Manual”.
Version 1.12 (updated: Mar. 4, 2008)
Improved sound quality: Echo Canceller
The Echo Canceller function has been improved.
Specification change: Microphone levels changed
Because the microphone gain is high, sound quality is sometimes compromised depending on the settings of the communication application (Web conferencing, etc.). To correct this problem, the microphone gain levels have been changed. As a result, the default pickup range setting may be slightly low. If so, the pickup range can be adjusted by raising the microphone levels using the microphone level adjustment of the PJP-25UR controller.
For details, see p12-13 in “User's Manual” and the “PJP-25UR Controller” help.
Added function: Microphone & speaker control via USB
It is now possible to adjust or select the PJP-25UR microphone and speaker levels from within the sound settings of the PC. The default setting is ON.
For details, see p12-13 in “User's Manual” and the “PJP-25UR Controller” help.
Added function: Microphone audio band selection
A microphone audio band selection function has been added.By selecting an appropriate audio band, communication applications (Web conferencing etc.) are enabled with optimal sound quality. The default setting is “Normal” (7 kHz band).
For details, see p12-13 in “User's Manual” and the “PJP-25UR Controller” help.
Added function: New speaker mode
A “Wide” mode has been added to the modes of sound reproduction from the speakers.
For details, see p12-13 in “User's Manual” and the “PJP-25UR Controller” help.
Added function: New firmware upgrade method
Once firmware (a bin file) has been downloaded to the PC, it can now be transferred to the PJP-25UR.
For details, see p19 in “User's Manual”
Version 1.04 (updated: Jan. 17, 2008)
Noise Canceller & Echo Canceller upgraded to improve overall sound quality.
Noise Canceller & Echo Canceller functions upgraded.
Specification changes made to the default settings of the Echo Canceller Mode
The Echo Canceller Mode default has been changed to Middle.
Version 1.02 (updated: Jan. 17, 2008)
Noise Canceller upgraded to improve overall sound quality.
Upgraded Noise Canceller functions.
Specification changes made to decrease audio output settings.
Audio output strength decreased 12dB.
Registered Date : 1/24/2013
Language : English
Size : 5.27 MB
SOFTWARE LICENSE AGREEMENT
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("Agreement") CAREFULLY BEFORE USING THIS SOFTWARE. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("Yamaha"). YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT.
BY DOWNLOADING OR INSTALLING THIS SOFTWARE OR OTHERWISE RENDERING IT AVAILABLE FOR YOUR USE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE.
1. GRANT OF LICENSE
1-1. Yamaha hereby grants you the right to use the programs and data files composing the software that is provided by Yamaha of the unified communication product that you purchase (hereinafter “This product”), and any programs and files for upgrading such software that may be distributed to you in the future with terms and conditions attached (collectively, "Software"), only on a computer, smartphone or electronic device that you yourself own or manage.
1-2. You shall not assign, sublicense, sell, rent, lease, loan, convey or otherwise transfer to any third party, upload to a website or a server computer to which specified or unspecified persons may access, or copy, duplicate, translate or convert to another programming language the Software except as expressly provided herein. You shall not alter, modify, disassemble, decompile or otherwise reverse engineer the Software and you also shall not have any third party to do so.
1-3. You shall not modify, remove or delete a copyright notice of Yamaha contained in the Software.
1-4. Except as expressly provided herein, no license or intellectual property right, express or implied, is hereby conveyed or granted by Yamaha to you.
2. OWNERSHIP AND COPYRIGHT
2-1. The Software is protected under the copyright laws and intellectual property in the Software is owned by Yamaha.
2-2. You agree and acknowledge that Yamaha does not transfer any intellectual property in the Software to you under this Agreement or otherwise.
3. TERM
3-1. This Agreement becomes effective upon your installing the Software and continues in effect unless or until terminated in accordance with the provision of 3-2 or 3-3 herein.
3-2. You may terminate this Agreement by deleting the Software installed into the on a computer, smartphone or electronic device that you yourself own or manage.
3-3. This Agreement will also terminate if you fail to comply with any of the terms and conditions of this Agreement.
3-4. In case this Agreement is terminated in accordance with the provision 3-3, you shall promptly stop using and delete the Software.
3-5. Notwithstanding anything to the contrary contained herein, Sections 2 through 6 shall survive any termination or expiration hereof.
4. LIMITED WARRANTY
1. YAMAHA MAKES NO REPRESENTATIONS ABOUT THE SUITABILITY OF THE SOFTWARE OR OF ANY CONTENT OR INFORMATION YAMAHA HAS PROVIDED FOR ANY PURPOSE. THE SOFTWARE IS PROVIDED “AS IS” WITHOUT EXPRESS OR IMPLIED WARRANTIES, INCLUDING WARRANTIES OF SATISFACTORY QUALITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGEMENT.
2. THIS WARRANTY IS GIVEN IN LIEU OF ALL WARRANTIES, CONDITIONS, TERMS, UNDERTAKINGS, AND OBLIGATIONS IMPLIED BY STATUTE, COMMON LAW, CUSTOM, TRADE USAGE, AND COURSE OF DEALING OR OTHERWISE, ALL OF WHICH ARE HEREBY EXCLUDED TO THE FULLEST EXTENT PERMITTED BY LAW.
5.LIMITATION OF LIABILITY
YAMAHA'S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EVEN IF YAMAHA IS LIABLE, EXCEPT IN CASE OF WILLFUL MISCONDUCT OR GROSS NEGLIGENCE BY YAMAHA, IN NO EVENT SHALL YAMAHA'S TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES AND CAUSES OF ACTION (WHETHER IN CONTRACT, TORT OR OTHERWISE) EXCEED THE AMOUNT PAID FOR THE SOFTWARE.
6. THIRD PARTY SOFTWARE
6-1. Third party software and data ("Third party software") may be attached to the Software. If, in the written materials or the electronic data accompanying the Software, Yamaha identifies any software and data as Third party software, you acknowledge and agree that you must abide by the provisions of any agreement provided with the Third party software and that the party providing the Third party software is responsible for any warranty or liability related to or arising from the Third party software. Yamaha is not responsible in any way for the Third party software or your use thereof.
6-2. YAMAHA PROVIDES NO EXPRESS WARRANTIES AS TO THE THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AS TO THE THIRD PARTY SOFTWARE.
6-3. Yamaha shall not provide you with any service or maintenance as to the Third party software.
6-4. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, LOSS OF BUSINESS PR OFITS, LOSS OF BUSINESS INFORMATION, LOSS OF BUSINESS INTERRUPTION OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES) ARISING OUT OF THE THIRED PARTY SOFTWARE, USE THEREOF, OR INABILITY TO USE THEREOF, EVEN IF YAMAHA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EVEN IF YAMAHA IS LIABLE, EXCEPT IN CASE OF WILLFUL MISCONDUCT OR GROSS NEGLIGENCE BY YAMAHA, IN NO EVENT SHALL YAMAHA'S TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES AND CAUSES OF ACTION (WHETHER IN CONTRACT, TORT OR OTHERWISE) EXCEED THE AMOUNT PAID FOR THE SOFTWARE.
7. SEVERABILITY
In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect.
8.U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE
The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein.
9.GOVERNING LAW
This Agreement shall be governed by and construed in accordance with the laws of Japan.
10. JURISDICTION
Any dispute arising out of this Agreement shall be subject to the exclusive jurisdiction of the Tokyo District Court of Japan without reference to conflicts of laws principles.
11. AMENDMENT OF THIS AGREEMENT
11-1. Yamaha may at its discretion amend, revise or update this AGREEMENT.
11-2. When Yamaha amend, revise or update this Agreement, Yamaha specifies the amendment contents and the effective date and notify it on Yamaha ‘s Website by the reasonable period before the effective date.
11-3. You may terminate this Agreement before the effective date in accordance with the way that Yamaha specifies if you don’t agree with the amendment of this Agreement.
