|
|
Q.
|
The MusicCAST server is turned off automatically.
|
|
A.
|
If there is no key operation, no recording, no playback, no encoding and no data distribution to a MusicCAST client within approximately 30 minutes, the MusicCAST server goes into the LAN standby mode automatically, regardless of the standby mode settings.
|
|
Q.
|
The MusicCAST client is turned off automatically.
|
|
A.
|
It should be normal. Here are some reasons:
- If there is no key operation and no playback within approximately 30 minutes, the MusicCAST client turns to sleep mode automatically.
- Someone carried out sleep operation in the 'Client Playback' menu on the server.
- Client off timer on the server became active.
|
|
Q.
|
When I turn on MusicCAST client, sometimes it doesn't allow me to choose a song for a while.
|
|
A.
|
It is normal. If the server was in the LAN standby mode, it takes a few minutes to "wake up".
|
|
Q.
|
When can I turn off the MusicCAST server?
|
|
A.
|
You should turn off the MusicCAST server when it is in any standby mode.
When you press the STANDBY/ON button to turn it to any standby mode, all the client status LEDs are lit up for a while and then turn off. If all blue status LEDs are lit up, the MusicCAST server isn't in a standby mode. If they are turned off, the MusicCAST server is in a standby mode. And then you can turn off the MusicCAST server.
NOTE: If the firmware version of the server is 0.86.10a or before, the client status LEDs aren't lit up for a while and turn off when you press the STANDBY/ON button. In this case, wait 10 second after pressing STANDBY/ON, and then turn off the MusicCAST server.
|
|
Q.
|
I turn the MusicCAST server to "system off mode", but it is still distributing music data to MusicCAST clients.
|
|
A.
|
Press and hold the STANDBY/ON key for about 2 seconds. Then the MusicCAST server will go to System Off mode. (The "System Off mode" means all MusicCAST components are turning off.)
Note: If MusicCAST server is doing any recording or going to wake up within 1 minute using the timer, this operation is ignored.
|
|
Q.
|
Can I turn off the server power using a client?
|
|
A.
|
No.
|
|
|
