|
|
Q.
|
Which Yamaha AV Receivers can the
MCX-1000 control?
|
|
A.
|
Below are YAMAHA AV Receivers
MCX-1000 can control:
- RX-V1 / DSP-AX1
- RX-V3000 / DSP-AX2
- RX-V1000 / DSP-AX10
- DSP-AZ1 / RX-Z1
- DSP-AX1 upgraded
- RX-V3200 / DSP-AX3200
- RX-V3300 / DSP-AZ2
- RX-V2300 / DSP-AX2300
- RX-V2400 / DSP-Z9 "MusicCAST
software Version Up Disc Vol.1".
"Controllable YAMAHA AV
receiver" menu under the "Information" menu shows the list of
AV receivers.
|
|
Q.
|
The Surround Program Change
function doesn't work.
|
|
A.
|
Confirm the settings for the MusicCAST
server and AV receiver according to following sequence:
- Confirm the RS-232C
cable connection.
- Confirm that the input
selector of the receiver is not selecting the "6ch input". If
the "6ch input" is selected, the surround program control
doesn't work.
- Confirm the input
selector of the receiver, which is connected to the MusicCAST server.
- Confirm AV receiver's
input which can be set in "Audio Connection Setting" menu on
MusicCAST server. To see the menu:
- Select "System
Setup" from "Top Menu".
- Select "AV
Receiver".
- Select "Audio
Connection Setting".
And confirm MusicCAST server is
connected to the selected input of the receiver.
- Set AV receiver's
Surround Program with MusicCAST's "Genre" using "Control
Setting" menu. To see the menu:
- Select "System
Setup" from "Top Menu".
- Select "AV
Receiver".
- Select "Control
Setting".
|
|
Q.
|
I can't select "Tuner
Preset" on the MusicCAST client.
|
|
A.
|
Confirm the settings for the
MusicCAST server and the AV receiver with following sequence.
- Confirm the RS-232C
cable connection.
- Confirm connection
between AV receiver output and MusicCAST server input.
- Use "ZONE
2" or "REC OUT" as AV receiver output.
- Connect it to the
MusicCAST server Analog input.
- Confirm the output
level of AV receiver is correct. (Check level setting of the AV
receiver.)
- Adjust "ANALOG
REC LEVEL" on MusicCAST server accordingly.
- Check setting on
"Tuner distribution setting" menu. The menu can be selected as
follows:
- Select "System
Setup" from "Top Menu".
- Select "AV
Receiver".
- Select "Tuner
distribution setting.
|
|
Q.
|
When I select "Tuner
Preset" on the MusicCAST client, the input of the AV receiver is changed
to TUNER.
|
|
A.
|
It is normal if you chose
"REC OUT" as the AV receiver output. In this case, choose
"ZONE 2".
|
|
Q.
|
The sound changed unexpectedly,
while I was listening to the Tuner Preset or External Input.
|
|
A.
|
Someone changed the input on
another MusicCAST client or the MusicCAST server.
|
|
Q.
|
I can't select the External
Input.
|
|
A.
|
When the MusicCAST server is
recording from External Input, you can’t choose another external input.
|
|
Q.
|
The Surround Program Change
occurred unexpectedly, while I was listening to playback from the MusicCAST
server.
|
|
A.
|
"Change surround
program" setting is enabled. Check as follows:
- Select "System
Setup" from "Top Menu".
- Select "AV
Receiver".
- Select "Control
Setting".
|
|
Q.
|
The Surround Program Change
occurred unexpectedly, while I was listening to another source.
|
|
A.
|
"Audio Connection Setting"
is incorrect. Check as follows:
- Select "System
Setup" from "Top Menu".
- Select "AV
Receiver".
- Select "Audio
Connection Setting".
|
|
|
