Saving and Loading User Voices with Smart Media Card

Regular User Voices and User Drum Kit Voices are all saved together into a folder on a Smart Media Card, using the 'All Voice' Save function. Voices can be loaded back in individually, if desired, by using the 'Voice' Load function. When loading in a single Voice, the Bank buttons can be used to select the Regular User Voice Bank, or the User Drum Kit Voice Bank.

1. Insert a formatted Smart Media Card into the Smart Media Card Slot.
2. Press the [FILE] button.
3. Press the [F1] 'CONFIG' button.
4. Press the [SF1] 'CURRENT' button.
5. Turn the Dial to display 'Current CARD' in the screen.
6. Press the [F2] 'SAVE' button.
7. Turn the Dial to display 'TYPE All Voice' in the screen.
8. Use the Cursor buttons to move the cursor in between the '[' and ']' brackets in the screen.
9. Name the folder to which the User Voices will be saved.
10. Press the [ENTER] button to save the User Voices into the folder on the Smart Media Card. This may take a minute or so.

1. Press the [F3] 'LOAD' button.
2. Dial 'TYPE Voice' in the screen.
3. Cursor to the folder containing the User Voices on the right side of the screen.
4. Press the [ENTER] button.
5. Select the Regular 'User Voice Bank' or 'User Drum Kit Voice Bank':
   1. To select the Regular User Voice bank, press the [USER] button.
   2. To select the User Drum Kit Voice bank, press and hold the [DRUM KITS] button, then press the [USER] button.
6. Cursor to a desired Voice in the screen to be loaded.
7. Press the [ENTER] button.
8. Dial the destination to load the Voice into.
9. Press the [ENTER] button.

MOTIF6 Owner's Manual, p. 266-267
MOTIF7 Owner's Manual, p. 266-267
MOTIF8 Owner's Manual, p. 266-267