Bulk Dumping DX7 Voices into the PLG150DX Plug-in Board

You can dump up to 64 voices into the user bank on the DX board. The voices must be saved in bank 35/000. The DX7 can only dump 32 voices at one time. After sending the first 32 voices to the PLG150 DX, load 32 more voices into the DX7 internal memory and send them.

A01through B16 will be voices 1-32

C01 through D16 will be voices 32-64
1) Press the [VOICE] button on MOTIF, then press the [PLG1], [PLG2], or [PLG3] button to      select the slot to which the PLG150DX is associated.

2) Press the [UTILITY] button.

3) Press the [F6] button for PLG utilities.

4) Press the [SF3], [SF4], or [SF5] button to which the PLG150DX is associated.

NOTE: [SF3]=PLG1, [SF4]=PLG2, and [SF5]=PLG3

5) Make sure that 'Bulk Block' says '01-32' for the first set of 32 voices, and '33-64' for the      second set of 32 voices.

6) On the DX7, press [FUNCTION], then press [8], then press [YES] to make 'System Info      Available'.

7) Press the [8] button so that the display indicates 'MIDI Transmit'.

8) Press the [YES] button.

9) On MOTIF, press [VOICE].

10) Press [F2].

11) Change the bank to 35/000.

12) Press [VOICE].

13) This first set of voices will be located in A01-B16.