Saving the Auto Accompaniment Split Point setting on a PSR620

The Auto Accompaniment Split Point always returns to default setting when the PSR620 is turned OFF and then ON again. To save the setting, the setup needs to be stored in a Registration Memory.
Saving the Setting:

1) Set the Auto Accompaniment Split Point to the desired key.

2) Press and hold down the [MEMORIZE] button while pressing the [REGISTRATION 1] button that is just to the right of the [MEMORIZE] button. (The settings can also be saved to Registrations 2, 3, or 4 if there is already an item saved to Registration 1.)
Recalling the Setting: 1) Power OFF the keyboard then power it back ON.

2) Press the [REGISTRATION 1] button, or whichever Registration button that was used in the Save operation.

3) Check the Auto Accompaniment Split Point setting.
NOTE: To return to a saved Split Position, a Registration Setting will need to be recalled each time the keyboard is powered up.

Reference: Owner's Manual p.41, 43-45