Saving and Recalling a Registration Memory on a PSR620

The Registration Memory feature makes it possible to store 128 complete Control Panel setups in the 32 Registration Memory banks (4 setups for each bank). Click herefor the list of Voice and Accompaniment parameters that can be stored. Saving a Registration Memory:
WARNING: Any data that was previously recorded in the selected Registration Memory location will be replaced by the new settings.
1) Select the desired 'VOICE' and 'ACCOMPANIMENT' parameters.

2) Press the or 'FUNCTION' buttons to move the cursor on the left side of the LCD screen to 'REGIST MEMORY'.

3) Use the [-/NO] or [+/YES] buttons, the numeric keypad, or the Data Dial to select the desired Registration Memory Bank (01 to 32) on the LCD screen.

4) Press and hold the [MEMORIZE] button.

IMPORTANT: The [MEMORIZE] button MUST be held down while saving Registrations, otherwise the operation will NOT be successful.

5) Press the desired 'REGISTRATION MEMORY' button, [1] to [4], to store the current setup.

NOTE: The Registration Memory number for the saved setup will appear above 'REGIST' in the LCD screen.

6) Release the [MEMORIZE] button.

Recalling a Registration Memory:

1) Press the or 'FUNCTION' buttons to move the cursor on the left side of the LCD screen to 'REGIST MEMORY'.

2) Use the [-/NO] or [+/YES] buttons, the numeric keypad, or the Data Dial to select the Registration Memory bank where the desired setup has been saved.

3) Press a 'REGISTRATION MEMORY' button, [1] to [4], to recall the desired setup.
NOTE: The number for the Registration Memory will appear in the LCD screen above 'REGIST' along with the saved parameter settings.

Reference: Owner's Manual, p.43