PSR730 Registration Memory

Registration Memory is used to store favorite keyboard settings to a button in a specific bank. A bank can hold four Registrations and it is possible to name a bank but it is not possible to name each individual instance in Registration Memory.
To store a panel setting in Registration Memory:

1) Create the sound to be saved, using voices, effects, style, harmony type, tempo setting, etc.

2) While holding the [MEMORY] button down, press one of the [REGISTRATION MEMORY] buttons at the center of the console.

NOTE: The [MEMORY] button must be held down while saving Registrations, or else the save will not be successful.

TIP: Give the bank an easily remembered name for easy reference when recalling Registrations.

aming a Bank:

) Use the Menu and buttons to select a REGISTRATION MEMORY (left side of the display).

2) Use the SUB-MENU and buttons to select REG NAMING.

3) Use buttons [1] thru [10] and the Plus [+] and Minus [-] buttons, or the dial to enter the new bank name.

TIP: Naming the bank concurrently while storing the Registration will make recalling the correct registration bank easier. When four registrations have been stored on one bank, the bank select can be used to switch to the next bank. Registrations can continue to be stored in this manner until all thirty-two banks are full. Registrations can be saved to floppy disk for back-up or storage.

NOTE: To recall a Registration select the bank & registration memory button that was selected to store the original Registration. This will recall your specific keyboard settings from memory .

Reference: Owners Manual, p. 57-60