FAQ Detail
| Select a search area | Enter a Keyword | Browse by area | |
|
|||
Digital Mixers
MY4DA Card Output Level Options
The MY4DA digital-to-analog card for the 01V has four gain switches, one for each output channel. Each switch has three positions: the '+4dBV' position on one side, the '+24dBV' position in the middle, and the '+18dBV' position on the other side. These are maximum output level ratings only. The nominal output levels are -10dBV (at the +4dBV position), +10dBV (at the +24dBV position) and +4dBV (at the +18dB position).
WARNING: Be sure to turn the 01V off before attempting to access these switches. The switches are located on the circuit board, inside the unit. They are located behind the XLR connectors. The switch label is located in the center of the circuit board.
