FAQ Detail
| Select a search area | Enter a Keyword | Browse by area | |
|
|||
Digital Mixers
Comparison Between the 01V Mic Inputs and Tape Returns
Mic Inputs: The Mic Inputs (input channels 1-12) are ''full-featured'' analog inputs that can accept ''microphone-level'' and ''line-level'' balanced or unbalanced inputs. Mic Inputs include:
• XLR and 1/4'' TRS input jacks
• Input gain adjust and pad
• 48 volt phantom power
• Normal/Reverse phase select
• Input attenuator
• 4-band fully parametric EQ
• Dynamics processor
• In-line delay
• Channel fader and pan
• Auxiliary Sends 1-4
• Effect Sends 1-2
• Input gain adjust and pad
• 48 volt phantom power
• Normal/Reverse phase select
• Input attenuator
• 4-band fully parametric EQ
• Dynamics processor
• In-line delay
• Channel fader and pan
• Auxiliary Sends 1-4
• Effect Sends 1-2
Tape Returns: The Tape Returns (input channels 17-24) are less ''full-featured'' than the Mic Inputs. The Tape Returns are accessible with one of the Option I/O cards inserted in the slot on the rear panel of the 01V. If the MY8-AD or MY4-AD card is used, the Tape Returns are analog inputs. If one of the digital I/O cards is used (MY8-AE, MY8-AT or MY8-TD), the Tape Returns become digital inputs. Tape Returns include:
Reference: 01V Owner's Manual, p. 40, 51
• 2-band fully parametric EQ
• Input attenuator
• Channel fader and pan
• Auxiliary Sends 1-2
• Effects Sends 1-2
• Input attenuator
• Channel fader and pan
• Auxiliary Sends 1-2
• Effects Sends 1-2
TIP: The Tape Returns can be ''swapped'' with the Mic Inputs. This allows the Tape Returns to use the full features of the Mic Inputs during mixdown or monitoring.
Reference: 01V Owner's Manual, p. 40, 51
