FAQ Detail
| Select a search area | Enter a Keyword | Browse by area | |
|
|||
CS Series
Enabling the PLG100VH Plug-in Board in a CS6X
Following installation of the PLG100-VH Card in the CS6X (make sure it is installed in the PLG1 slot), it is necessary to enable the Vocal Harmony feature in the Effects section of the Performance Memory.- 1) Plug a microphone into the A/D input of the CS6X.
2) Press the [PERFORMANCE] button.
3) Press the [EDIT] button.
4) Turn the (A) knob counterclockwise until 'Common' appears in the lower left of the screen.
5) Turn the (PAGE) knob to 'EFF PART' page.
6) Turn the (C) knob to set the 'PLG EF' to 'PartAD'.
7) Turn the (PAGE) knob to the 'EFF PLG' page.
8) Turn the (1) knob to select the type of VH desired.
9) Turn the (A) knob until 'PartAD' appears on the screen.
10) Turn the (B) knob to select 'mic'.
11) Turn the (C) knob to select '01[Mic ]'.
12) Adjust the Gain as necessary on the back of the CS6X.
