Recording Keyboard and Auto Accompaniment Parts Simultaneously on a PSR540

The PSR540 is equipped with a 16 Track real-time sequencer. The sequencer data is stored directly to an IBM formatted 720KB (2DD) floppy disk, with a capacity of 65,000 notes, or a 1.44MB (HD) floppy disk, with a capacity of 130,000 notes. The recordings are saved on the floppy disk in Standard MIDI File Format 0.

The procedure below involves recording while the user plays a keyboard part with the right hand and Auto Accompaniment chords with the left hand simultaneously.

NOTE: Yamaha Style Disks (Auto Accompaniments) and XG MIDI files (Backup Tracks) are available for purchase online at www.yamahamusicsoft.com. To order by phone, call Music Dispatch at (800) 637-2852. Ask for the Software Catalog. Music Dispatch also has a selection of 'Fake Books' (books with music written for Auto Accompaniment keyboards that show simple melody notes and chord names in large print). Ask for the 'Electronic Keyboard and Organ' or the 'Fake Books' Catalog.
Setting the Auto Accompaniment Split Point:
NOTE: The Auto Accompaniment Section of the keyboard can be disabled if only drum parts are to be recorded as an accompaniment to a keyboard part.

1) Press and hold the [ACMP ON/OFF] button while pressing the [DIRECT ACCESS] button.

2) Select one of the following options:


a) To disable the Auto Accompaniment section of the keyboard, press and hold the [-] button until the screen displays 'Split = C-2'. The Right-hand voice (R1) will be available across the entire keyboard.
b) To adjust the Auto Accompaniment split point, press the [+] or [-] button to move the split point up or down the keyboard as desired.


3) Press the [EXIT] button.

Selecting an Auto Accompaniment Style:

1) Press the [STYLE] button.

2) Type in the number of the Auto Accompaniment Style on the numeric keypad.

3) Take note of the Tracks that contain Accompaniment data. This is necessary information when selecting the Accompaniment Tracks in the Recording Procedure.

NOTE: The Tracks that contain Accompaniment data are denoted by the 'Volume Bars' above the Tracks [9] - [16] located in the lower right corner of the LCD screen.

4) Press the [EXIT] button.

Recording Procedure:
TIP: The [BACK] button can usually be pressed at anytime to return to the previous step.

1) Press the [RECORD] button. The screen will display 'RecMenu=Song'.

2) Press the [NEXT] button. The screen will display '001 New Song'.

3) Press the [NEXT] button.

4) Press the [+] button. The screen will display 'RecMode=MultiRec'.

5) Press the [NEXT] button three times. The screen will display 'RecPart T01=R1'.

6) Press one of the Auto Accompaniment Track buttons, [9] - [16]. See the Track Assigments below:

PSR540 Track to Accompaniment Part Assignments
Track	Accompaniment Part Assignment
9	RhS, Sub Rhythm
10	Rhm, Main Rhythm
11	Bas, Bass
12	CH1, Chord 1
13	CH2, Chord 2
14	Pad
15	Ph1, Phrase 1
16	Ph2, Phrase 2

7) Press the [NEXT] button. The screen will display 'RecPart Txx=xxx'.

8) Press the [+] button to set the Track to record.

NOTE: Repeat steps 6 and 8 to enable other Accompaniment Parts to be recorded.

9) Press any one of the Track buttons, [1] - [8]. The screen will display 'RecMode Txx=Ply'

10) Press the [BACK] button. The screen will display 'RecPart Txx=xxx'.

11) Press the [-] button until the screen displays 'RecPart Txx=R1'. This sets the selected Track to record the keyboard part, Voice R1.

12) Press the [NEXT] button. The screen will display 'RecMode Txx=Ply'.

13) Press the [+] button. The screen will display 'RecMode Txx=Rec'.

14) Press the [NEXT] button. The screen will display 'Rehearsal'.

15) If necessary, select a Voice for R1.

a) Press the [VOICE R1] button.
b) Type in the number of the Voice on the numeric keypad.
c) Press the [EXIT] button.


16) Press the [NEXT] button.


17) Select one of the following options:


a) Recording with an Intro:


1] Press the [INTRO] button.
2] Play the keyboard.
3] Proceed to step 18.


b) Recording without an Intro:


1] Press either the [MAIN A] or [MAIN B] button.
2] Play the keyboard.
3] Proceed to step 18.


c) Recording without having to play the keyboard first:


1] Press the [START/STOP] button. The accompaniment will begin to play.
2] Play the keyboard at any time.
3] Proceed to step 18.

TIP: Press any of the 'Style Control' buttons, [INTRO], [MAIN A] or [MAIN B] during the Song to add fills and pattern changes as desired.


18) Press the [START/STOP] or [ENDING] button when finished.

TIP: Press the [ENDING] button twice to add a ritardando effect.

19) Select one of the following options:


a) Save the Recording:


1] Press the [+] button.
2] To continue recording proceed to the 'Recording Additional Tracks' procedure OR to finish recording press the [EXIT] button.


b) Cancel the Save operation:


1] Press the [-] button.
2] Return to step 14 to re-record the Track(s) OR to finish recording press the [EXIT] button.

Recording Additional Tracks:

1) Press any one of the Track buttons, [1] - [8]. The screen will display 'RecMode Txx=Ply'

2) Press the [BACK] button. The screen will display'RecPart Txx=xxx'.

3) Press the [-] button until the screen displays 'RecPart Txx=R1'. This sets the track to record the keyboard part, Voice R1.

4) Press the [NEXT] button. The screen will display 'RecMode Txx=Ply'.

5) Press the [+] button. The screen will display 'RecMode Txx=Rec'.

6) Press the [NEXT] button. The screen will display 'Rehearsal'.

7) If necessary, select a Voice for R1.

a) Press the [VOICE R1] button.
b) Type in the number of the Voice on the numeric keypad.
c) Press the [EXIT] button.


8) Press the [NEXT] button.


9) Select one of the following options:


a) Recording without having to play the keyboard first:


1] Press the [START/STOP] button. The previously recorded Tracks will begin to play.
2] Play the keyboard at any time.
3] Proceed to step 10.


b) Recording in sync with the keyboard part:


1] Begin playing the keyboard at any time.
2] Proceed to step 10.


10) Press the [START/STOP] button when finished.

11) Select one of the following options:


a) Save the Recording:


1] Press the [+] button.
2] To record additional Tracks return to step 1 in this procedure OR to finish recording press the [EXIT] button.


b) Cancel the Save operation:


1] Press the [-] button.
2] Return to step 6 to re-record the Track(s) OR to finish recording press the [EXIT] button.

Reference: Owner's Manual, p.78-91