Accessing and Adjusting the Equalizer for the Aux Sends on an 01V

1. Press any one of the [AUX 1] to [AUX 4] buttons found in the 'FADER MODE' group to select an Aux Send.
2. Press the 'STEREO/MASTER' [SEL] button. If the 'EQ' page (click here to view) for the selected Aux Send DOES NOT appear proceed to step 3, otherwise proceed to step 4.
   
   
   NOTE: The 'EQ' page for the selected Aux Send should appear on the LCD if the 'EQ AUTO SCREEN' parameter in the 'PREFERENCES-1' page in UTILITY mode is set to 'ON' (default). Click here to view the 'PREFERENCES-1' page and the procedure for checking and changing the 'EQ AUTO SCREEN' parameter.
   
   
3. Press the [EQ/ATT] button to access the 'EQ' page for the selected Aux Send.
   
   
   NOTE: This will only be necessary if the 'PREFERENCES-1' page in UTILITY mode is not accessed when the 'STEREO/MASTER' [SEL] button is pressed.
   
   
4. Adjust the EQ controls in the 'SELECTED CHANNEL' section for the desired frequency and gain.
   
   
   1. Use the [HIGH], [HI-MID], [LO-MID], and [LOW] buttons to select the desired EQ bands.
   2. Turn the (F) and (G) control knobs to adjust the 'Frequency' and 'Gain', respectively.