FAQ Detail
| Select a search area | Enter a Keyword | Browse by area | |
|
|||
Professional Stage Pianos
Setting the Transpose Amount for a Sub Voice in Split Mode on a P200
In the Split mode, by default, the Main Voice is transposed, but the Sub Voice is not. The following procedure will set the transpose amount for the Sub Voice in Split mode.
-
Press the [SPLIT/BALANCE] button to enter Split mode. The LED above the button will light, and the keyboard will split into two areas, one playing the Main Voice selected in Single or Dual mode, and the other playing the Voice which was last selected as the Split mode Sub Voice.
Press and hold the [TRANSPOSE/DETUNE] button.
Press and hold the [SPLIT/BALANCE] button.
NOTE: 'TRANSPOSE/SPLIT SUB' will appear on the LCD with the transpose value indicated on the right side of the display.
While holding both buttons, press a key on the keyboard, or the [-1/NO] or [+1/YES] buttons, to set the transpose amount.
NOTE: The transposition range is +/- 24 semitones. Refer to the table below for a complete list.
|
P200 Semitone Transpose Values
|
||||
| Note | Semi-Tone | Note | Semi-Tone | |
| C1 | -24 | C3 | +0 | |
| C#1 | -23 | C#3 | +1 | |
| D1 | -22 | D3 | +2 | |
| Eb1 | -21 | Eb3 | +3 | |
| E1 | -20 | E3 | +4 | |
| F1 | -19 | F3 | +5 | |
| F#1 | -18 | F#3 | +6 | |
| G1 | -17 | G3 | +7 | |
| G#1 | -16 | G#3 | +8 | |
| A1 | -15 | A3 | +9 | |
| Bb1 | -14 | Bb3 | +10 | |
| B1 | -13 | B3 | +11 | |
| C2 | -12 | C4 | +12 | |
| C#2 | -11 | C#4 | +13 | |
| D2 | -10 | D4 | +14 | |
| Eb2 | -9 | Eb4 | +15 | |
| E2 | -8 | E4 | +16 | |
| F2 | -7 | F4 | +17 | |
| F#2 | -6 | F#4 | +18 | |
| G2 | -5 | G4 | +19 | |
| G#2 | -4 | G#4 | +20 | |
| A2 | -3 | A4 | +21 | |
| Bb2 | -2 | Bb4 | +22 | |
| B2 | -1 | B4 | +23 | |
| C5 | +24 | |||
Release the [TRANSPOSE/DETUNE] and [SPLIT/BALANCE] buttons to return to Play mode.
Reference: Owner's Manual, p. 37-39
