FAQ Detail
| Select a search area | Enter a Keyword | Browse by area | |
|
|||
Digital Mixers
Configuring the Omni Outputs as Direct Outs on an 01V
The Omni Outputs on the back of the 01V can be used as Direct Outputs (Channels 1 - 16) as well as for Aux, Bus, and additional Stereo Outputs.
NOTE: If the Omni Outputs are used as Direct Outputs, they are Post-Fader.
-
Press the [PAN/ROUTING] button to locate the 'PAN/ROUTE' page '4'.
NOTE: The 'PAN/ROUTE' page number will be located on a tab in the upper left corner of the display.
Use the
, 
, 
, or 
'CURSOR' buttons to select the 'OMNI 1' parameter box in the 'OMNI OUT SELECT' section.
Turn the 'PARAMETER' wheel to select the desired source for the Omni Out.NOTE: The sources listed are for Channels 1-16 (CH1-CH16), Aux (AUX1-AUX4), Bus (BUS1-BUS4), and Stereo (STOUT R, STOUT L ).
Press the [ENTER] button. Repeat steps 2 - 4 for the remaining three Omni Outputs as desired.
Reference: Owners Manual, p. 116
