Editing Amp Simulator Parameter Settings on a QY100

The QY100 comes with 18 Guitar and 5 Microphone Amp Simulator preset programs, or patches. Although, they are ''preset'' at the factory, they can be modified as desired.

1) Press the [PARAMETER] button to access the Amp Simulator preset programs edit mode. 'GTR/MIC EDIT' will appear on the display.

2) If necessary, press the 'Up' Cursor button until the Amp Simulator preset is highlighted. I.e. G01:MultiDrive.

3) Press the [-1/NO] and/or [+1/YES] buttons until the desired preset is selected.

4) Use the Cursor buttons to highlight the desired parameter setting to be edited.

5) Edit the selected Amp Simulator parameter.


a) Decrement or Increment the parameter value.


1] Press the [-1/NO] and/or [+1/YES] buttons until the desired parameter setting value is displayed.

or

b) Type in the value directly.


1] Press and hold the [SHIFT] button, then use the black Micro-Keyboard key buttons to type in the numeric value.
2] Press the [ENTER] button to set the parameter with the new value.


6) Repeat steps 4 and 5, as desired, to edit any additional parameters.


7) Press the [EXIT] button to when editing is completed.