FAQ Detail
| Select a search area | Enter a Keyword | Browse by area | |
|
|||
Portable Digital Recorders and Audio Workstations
Routing a Monitor / Playback Track to an Internal Effects Processor on an AW4416
Any or all Tracks can be routed through the two Effects Processors in the AW4416. Since all Tracks ''share'' the two Effects Processors, it is not possible to have each Track routed to a different, or dedicated, Effect simultaneously.
-
Press the [MONI] button in the 'MIXING LAYER' section, to select the Mixing Layer for the Monitor Tracks.
Press the [AUX 7] (EFF1) or [AUX 8] (EFF2) button in the 'MIXER' section, and raise the faders of any tracks that need Effects.
NOTE: The higher a Track fader is raised, the greater the amount the Track will be ''effected''.
Press the [HOME] button in the 'MIXER' section. Press the [17-24/RTN] button in the 'MIXING LAYER' section, to view the Effects 'RTN1' and 'RTN2' levels. If not illuminated, press the [ON] button above fader '15' (RTN1) and/or '16' (RTN2). Adjust the Effects Return levels with fader '15' (RTN1) and/or '16' (RTN2) as desired.
Reference: Operation Guide, p. 166-170
