Disabling the Transmission of Arpeggiator Data via MIDI on a CS2X

The Arpeggiator data is normally output via MIDI from the CS2X Control Synthesizer. It is possible, however, for Arpeggiator data to be excluded from the normal MIDI output, if desired, using the following procedure. 1) Turn OFF the CS2X.

2) Press and continue to hold down the [ARPEGGIO] button while turning ON the CS2X.
NOTE: To re-enable the normal transmission of Arpeggiator data via MIDI, turn the unit OFF and back ON.

Reference: Owner's Manual, p. 8