Routing an Input Signal to a Recorder Track on an AW4416

1. Press the [SETUP] button in the 'UNIT' section.
2. Press the [F1] button to display the 'Patch IN' page.
3. The 'RECORDER TRACK INPUT ASSIGN' area of the screen is used to route signals from the 24 Input Channels, 16 Monitor (Playback) Channels, and 2 Effects Return Channels to the 16 Recorder Tracks:
   1. To route one of the first 16 Input Channels directly to a Recorder Track, cursor to the box below the desired Recorder Track number, then dial the desired Input Channel Direct Out 'DIR 1' - 'DIR 16'.
   2. To route any Channels to a Recorder Track via a Bus (useful for routing multiple Channels to a Recorder Track):
      1. Cursor to the box box below the desired Recorder Track number, then dial the desired Bus 'BUS 1' - 'BUS 8'.
      2. Press the [PAN] button in the 'MIXER' section. The 'PAN/ROUTE' screen is displayed.
      3. Use the [F1] - [F2] buttons to select a Channel group containing the Channel to be recorded.
      4. Find that Channel in the screen and the Bus numbers underneath it. Cursor to the Bus number chosen in step 1 (above), and press the [ENTER] button to select it. The Channel is now routed to the Recorder Track.