FAQ Detail
| Select a search area | Enter a Keyword | Browse by area | |
|
|||
Digital Mixers
Connecting a MOTU 2408 to an 01V via an MY8TD TDIF Card
When using the 01V with a MOTU 2408 via the MY8TD TDIF card, the dipswitch on the card will need to be set to ''EXT 88''. Also, make sure that both the 01V and the 2408 are setup for proper wordclock operation. The 01Vs default wordclock setting is to internal at 44.1khz. If desired, the 01V can also be configured to be a word clock ''slave''.
Configuring the 01V as a Wordclock Slave:
-
Connect the MOTU 2408 to the MY8TD TDIF Card in the 01V.
Power ON the MOTU 2408 and the 01V.
If necessary, configure the MOTU 2408 to be the wordclock ''master''. Refer to the MOTU 2408 Owner's Manual as required.
Press [SETUP] button until 'SETUP Page 1' is displayed.
Use the cursor buttons to select 'OPTION SLOT'.
NOTE: There should not be an ''X'' through the 'OPTION SLOT' box. If there is an ''X'', then the 01V is not detecting a viable wordclock from the MOTU 2408.
Press the [ENTER] button. This configures the 01V as a wordclock slave to the wordclock from the MOTU 2408.
