FAQ Detail
| Select a search area | Enter a Keyword | Browse by area | |
|
|||
Portable Digital Recorders and Audio Workstations
Recording a Song onto the Stereo Track of an AW2816
Before a Song can be recorded onto an audio CD with an AW2816, it must be recorded onto the 'Stereo Track'. If this is not done, the Song will not be displayed in the Song List screen under 'Mastering' because there will be no 'Mastering' data.
IMPORTANT: If the song was recorded at a sample rate of 48 kHz, it will not be possible to create an audio CD from this song.
IMPORTANT: If the song was recorded at a sample rate of 48 kHz, it will not be possible to create an audio CD from this song.
-
Load the desired Song.
-
Press the [SONG] button.
Use the (DATA/JOG) dial to select the Song.
Use the 'CURSOR' buttons to select 'LOAD'.
Press the [ENTER] button. A pop up window will prompt 'Will save current Song. Are you sure?'
-
Use the 'CURSOR' buttons to select 'CANCEL' to cancel the Load operation.
Use the 'CURSOR' buttons to select 'YES' to save the current Song and load the selected Song.
Use the 'CURSOR' buttons to select 'NO' to load the selected Song without saving the current Song.
-
Press the [TRACK] button in the 'RECORDER' section.
Press the [RTZ] (Return to Zero) button located above the transport buttons.
Press the red [ST] button in the 'REC TRACK SELECT' section. The button will blink repeatedly. This arms the Stereo Track for recording.
Press the [PLAY] and [REC] buttons simultaneously, to begin recording.
Allow the AW2816 to go through the Song completely.
Press the [STOP] button when the Song has finished.
Use the 'CURSOR' buttons to highlight the 'SAVE' parameter located on the screen.
Press the [ENTER] button. The mix of the song is now recorded onto the Stereo Track.
