On the front panel of the keyboards there are 8 'REGISTRATION MEMORY' buttons. Each Registration button 'holds' one 'setup'. However, these Registration Memories are erased each time the keyboards are powered OFF. It is necessary to save the Registration Memories each time they are created or modified. Registration Memories are saved to either 'USER' memory or Floppy Disk in groups of 8 as a Registration Bank 'File'. Registration Bank 'Files' can be organized into Folders, if necessary. This hierarchical method is similar to that used in Microsoft Windows™ where 'Folders' and 'Files' may be managed using the familiar CUT, COPY, PASTE and DELETE functions.

Creating a Folder for Registration Bank Files (Optional):

1) Press the [J] LCD button to select 'REGISTRATION BANK'.

2) Use the [BACK] or [NEXT] buttons to select a memory location, 'USER' memory or 'FLOPPY DISK' drive.

3) Press the '7' LCD button to select 'NEW'.

4) Use the '1' - '8' or LCD buttons to name the Folder.

5) Press the '8' LCD button to select 'OK' to store the Folder into the chosen memory location. This folder can now be used to hold groups of Registration Bank 'Files'.

6) Press the [EXIT] button to return to the 'MAIN' screen.

Saving Single Registrations:

1) To save a single front panel setting (Registration) to one of the 8 'REGISTRATION MEMORY' buttons, press and hold the [MEMORY] button, then press the desired 'REGISTRATION MEMORY' button, [1] - [8].

WARNING: These settings are saved into a temporary memory buffer, and will be lost when the unit is turned OFF, unless the following steps are performed.

Saving a Registration Bank

1) Press the [J] LCD button to select 'REGISTRATION BANK'.

2) Use the [BACK] or [NEXT] buttons to select 'USER' memory or 'FLOPPY DISK' drive to store the Registrations.

3) Press the '6' button to select 'SAVE'. This takes a 'snapshot' of the 8 Registration Memories located in the temporary memory buffer and saves them to a Registration Bank 'File'.

4) Use the '1' - '8' and LCD buttons to name the Registration Bank 'File'.

5) Press the '8' LCD button to select 'OK' to save the Registration Bank 'File' into the selected memory location.

6) Select one of the following options:


a) To name the 8 individual Registrations within the Registration Bank 'File', proceed to 'Naming Individual Registrations'.

b) To finish, press the [EXIT] button to return to the 'MAIN' screen.

Naming Individual Registrations:

1) Press the '8' LCD button to select 'EDIT'.

2) Press the '1' LCD button to select 'NAME'.

3) Use the [A] - [D] and [F] - [I] LCD buttons to select the desired Registration.
4) Press the '7' LCD button to select 'OK'.

5) Use the '1' - '8' or LCD buttons to name the Registration.

6) Press the '8' LCD button to select 'OK' to store the name.

7) Select one of the following options:


a) To name other Registrations, repeat steps 2 - 6.

b) Press the '8' LCD button to return to the 'REGISTRATION BANK' screen. Proceed to step 8.

8) Press the [EXIT] button to return to the 'MAIN' screen.

Loading a Registration Bank 'File':

NOTE: The 'REGISTRATION MEMORY' button settings are cleared whenever the unit is turned OFF. To load Registrations back in after the unit has been turned ON (or to select a different Registration Bank), the following procedure must be performed.

1) Press the [J] LCD button to select 'REGISTRATION BANK'.

2) Use the [BACK] or [NEXT] buttons to select a memory location, 'USER' memory or 'FLOPPY DISK' drive, that contains the desired Registration Bank 'File'.

3) Select the desired Registration Bank 'File' using the [A] - [J] LCD buttons. The 8 'REGISTRATION MEMORY' buttons will now call up the Registrations in the selected Bank.

NOTE: If the desired Registration Bank 'File' was stored in a Folder, use the [A] - [J] LCD buttons to select the desired Folder, then use the same buttons to select the desired Registration Bank 'File'.

Reference: PSR2000/1000 Owner's Manual, p. 84-86