FAQ Detail
| Select a search area | Enter a Keyword | Browse by area | |
|
|||
Portable Digital Recorders and Audio Workstations
Applying EQ to a Channel on an AW4416
The AW4416 provides a full a four-band parametric equalizer on all of the mixer channels. This four-band EQ allows the user to have extensive control over the tonal charateristics of all tracks and input signals.
-
Press the desired 'MIXING LAYER' button for one of the following EQ options depending upon the playback channel to which the EQ is to be applied:
-
To apply EQ to an Input Channel, press the desired [1-16] or [17-24/RTN] 'INPUT' button.
To apply EQ to a Playback Channel, press the [MONI] 'RECORDER' button.
-
Press the [SEL] button above the channel to which EQ will be applied.
Select the desired EQ setting using one of the following methods:
-
Set the desired EQ level from the 'EQ EDIT' page:
-
Press the [EQ] button then the [F1] button to access the 'EQ EDIT' screen. Click here to view the 'EQ EDIT' page.
If the 'EQ ON' field is set to 'OFF', press the
, 
, 
or 
, 'CURSOR' buttons as needed to move the cursor to the 'EQ ON' field.
Press the [ENTER] button to toggle the 'EQ ON' field to 'ON'.
Adjust the EQ as desired using the , , or , 'CURSOR' buttons or the (DATA/JOG) dial.-
Select an EQ preset from the 'EQ LIBRARY' page:
-
Press the [EQ] button then the [F2] to access the 'EQ LIBRARY' page. Click here to view the 'EQ LIBRARY' page.
Use the (DATA/JOG) dial to select the desired preset from 'No. LIBRARY TITLE' list.
NOTE: Library numbers range from 1 to 128. Presets 1-40 are recall-only, factory installed presets that cannot be renamed. Press the
, , or , 'CURSOR' buttons as needed to select 'RECALL' in the screen.
Press the [ENTER] button to activate the EQ preset.