Connecting and Loading from an External SCSI CD-ROM Drive to the A4000 and A5000 Samplers

1) Verify 'Self ID' number on the sampler.

a) Press the [DISK] button.
b) Press the [F5] button.
c) Turn (1) KNOB to select 'DISK-Setup' page.
d) Note Self ID number.

2) Turn OFF the sampler.

3) Set the SCSI ID on the CD-ROM drive different from 'Self ID' number.

4) Turn the CD-ROM drive 'Terminator' switch to ON.

5) Connect a SCSI cable between both units.

6) Power ON the CD-ROM drive, and then Power ON the sampler.

7) Press the [DISK] button.

8) Press the [F5] button. The name of the CD-ROM drive should be indicated next to its SCSI ID number.It may be necessary to turn (2) KNOB to view all 8 SCSI ID's.

9) Use (2) KNOB to highlight CD-ROM drive.

10) Use (3) KNOB to set the 'MOUNT' parameter to ON.

Loading a Program from the A4000/A5000 CD-ROM Library

1) Insert a disc into CD-ROM drive

2) Press the [DISK] button

3) Press the [F5] button

4) Turn (1) KNOB to select the 'DISK-Disk' page.

5) Turn (4) KNOB to select the desired partition.

6) Press the [F1] button to select 'DISK-PgmLoad' page.

7) Turn (4) KNOB to select the desired program.

8) Press (4) KNOB to load the selected program.

9) Press (5) KNOB to execute the loading procedure.