FAQ Detail
| Select a search area | Enter a Keyword | Browse by area | |
|
|||
Portable Digital Recorders and Audio Workstations
Using the Quick Record Function on an AW4416
The version 2.0 update for the AW4416 added a Quick Record function which allows the user to quickly setup the patching within the AW4416 for recording.
-
Press the [INPUT 1-16] button in the 'MIXING LAYER' section.
Raise the desired input faders to 0. This sets the input levels.
Press the [QUICK REC] button and then the [F2] button.
Use the
, 
, 
and 
cursor buttons to select the jack symbol (the small circle) next to the desired input channel.
Press the [ENTER] button.
Use the , , and cursor buttons to select the jack symbol (the small circle) next to the track that is to be recorded.
Press the [ENTER] button. A cable should now connect the input channel to the track that is to be recorded onto.
Repeat steps 2 and 7 for connecting other input channels to the tracks.
Use the , , and cursor buttons to select 'EXECUTE'.
Press the [ENTER] button. When the confirmation window appears.
Use the , , and cursor buttons to select 'OK'.
Press the [ENTER] button.
Simultaneously press the [PLAY] and [REC] buttons located in the 'TRANSPORT' section to engage the recording process.
Press the [MONI] button and adjust the faders to the desired monitoring level.NOTE: When using the Quick Record feature of the AW4416 it is not possible to connect multiple inputs to a single track. Each track can only have a single input. However, it is possible to connect an input to multiple tracks if desired.
