Studio-quality Effects Anywhere You Need Them

The REV100 can be added to a recording system in a multitude of ways to meet individual signal-processing requirements. Since the REV100 is so affordable there's no reason why you can't use several at points where its outstanding processing power is most needed.

The "normal" way to use a signal-processor with a mixing console is patched into the aux send/effect return loop. But if you want to use the effects only on a specific instrument it might be more convenient to patch a REV100 in-line between the instrument and mixer inputs. You could also patch into the insert I/O jacks of one or two channels if you want to apply the effects directly to low-level microphone signals or returns from a recorder. You might also want to have a REV100 between the mixer direct or group outputs and your multitrack or master recorder, using the REV100's balance control to achieve the required effect mix.