All Beech Shells

The bass drum utilizes an 8-ply, 10mm shell construction while the floor tom and 12- through 16" toms use a 6-ply, 7.5mm shell. The 8" and 10" toms also use 6-ply shells but 6mm thick. Their new designs place an emphasis on mid- and low-frequencies with just the right amount of power to deliver a well-balanced sound. Beech Custom Absolute have the attack and presence of Maple and the bottom-end punch of Birch.

Beech Shells and the Vintage Finish

The Vintage finish is a special synthetic resin finish that is applied by hand on high-quality wind instruments. While enhancing the tone of the beech shell, the Vintage finish also provides a durable, waterproof finish that virtually eliminates the influence of weather and humidity on the drum. Over the course of time, the color of the shell will change to a deeper hue that you will surely love.

Lugs

The unique chrome lug casings found on the Absolute series are fixed to the drum shell with only a single bolt allowing the drum to vibrate freely. A special nylon insert prevents tension rods from becoming loose during play.

Bass Drum Spurs

A sturdy hexagonal design and fixed angle position allow our spurs to withstand bass drum kicks. Height adjustment and the releasing and retracting of the pointed spur is made easy with a drum key.

Floating Bass Drum System

Height adjustment on the pedal side of the bass drum is possible with the pipe post stabilizer. Use of this system ensures that the beater makes contact at the center of the head. The stabilizer fits into a pipe clamp on the underside of the drum that allows quick and easy adjustment of the height. The post is equipped with a memory clamp that ensures subsequent settings will be quick and precise every time, while a pair of supports provides added stability.

Mounted Toms and Floor Toms Equipped with YESS Mounts

Long found on our high-end drum kits our original YESS (Yamaha Enhanced Sustain System) mounting system is on all Beech Custom Absolute toms and floor toms. This rod clamp system allows attachment of the drum to the tom holder without the need of a hole in the drum shell for the rod to pass through. The YESS clamp is attached to the shell at the nodal point with two bolts so as to allow the shell to vibrate freely without degrading the shell's dynamic range and sustain. The nodal point is the location on a shell with the least amount of vibration allowing for the mount to have minimal affect to the resonance of the shell.

Ball Clamp & Triple Holder

This round ball clamp has long been a fundamental part of Yamaha System Drums. Made of super-hard resin, the ball is held firmly in place with a steel plate and large wing bolt. While providing ease of operation, this system also delivers total freedom in setting and superior stability.

The triple tom holder accommodates two toms as well as a cymbal holder to provide a wide variety of set up possibilities.