|
|
REV500
Reverbation unit with DSP3 Engine
| Affordable | |
Yamaha's design team has worked hard to make REV500 sound great but remain affordable. |
| Easy to Use | |
A large custom LCD display and dedicated rotary controls for the four most critical reverb parameters make REV500 extremely easy to use. |
| Superb Sound Quality | |
REV500 features 20-bit AD/DA oversampling converters and the same DSP as that of the PROR3 for superb sonic performance. |
| True Stereo Processing | |
Unlike some pseudo stereo reverberators, REV500 is a true stereo reverb processor, with independent left and right channels. |
| Organized Program Libraries | |
Reverb programs are categorized into group for selection ease. The 100 preset programs and 100 user programs are divided into four categories: Hall, Room, Plate and Special. |
| Quick Audition | |
REV500 has snare and rim shot samples built-in, so programs and edits can be auditioned directly from the front panel (AUDITION button). |
| Professional Connectors | |
Balanced XLR and phone jack connections allow simple hookup to professional or semiprofessional gear. Input and output levels for each channel are independently switchable between -10dB and +4dB. |
| Input Level Monitor | |
A dual level control and two four-segment LED level meters simplify level setting for optimal performance. |
| MIDI | |
REV500 supports real-time parameter control via MIDI Control Changes and program selection via MIDI Program Changes. MIDI Bulk Dump is used for user program backup. |
| Foot Switch | |
An optional footswitch can be used to mute the reverb effect or select reverb programs. Selection order is determined by the MIDI Program Change Map. |
| Audio | Frequency Response: 20Hz - 20kHz (+1, -2dB); Dynamic Range: 96dB typical, greater than 90dB; Noise Level: Less than -72dB (IHF-A Filter); THD: Less than 0.03% (1kHz @max. level, CD 20kHz LPF filter) | | AD/DA Conversion | AD: 20-bit, 64-times oversampling; DA: 20-bit 8-times oversampling; Sampling Rate: 44.1 kHz | | MIDI Control | Program Change, Control Change, Parameter Change, Bulk Dump | | Memories | Preset: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25; User: HALL 1-25, ROOM 1-25, PLATE 1-25, SPECIAL 1-25 | | Inputs | Connector: XLR-3-31 type x 2, phone jack x 2; Nominal Level: +4/-10dB switchable; Impedance: 20 kOhms | | Outputs | Connector: XLR-3-32 type x 2, phone jack x 2; Nominal Level: +4/-10 dB switchable; Impedance: 150 Ohms | | Front Panel | Controls: INPUT LEVEL, PRE DELAY, REV TIME, HI-RATIO, ER LEVEL; Buttons: TYPE, PRESET/USER, -, +, STORE, AUDITION, EFF LEVEL, UTILITY; LCD: Custom LCD; LED: Two four-segment level meters, UTILITY, EFF LEVEL; Switches: POWER | | Rear Panel | Connectors: INPUT L/R (XLR x 2, phone jack x 2), OUTPUT L/R (XLR x 2, phonejack x 2), FOOT SWITCH (phone jack), MIDI IN, MIDI OUT,(5-pin DIN x 2); Switches: INPUT LEVEL (+4/-10 Db), OUTPUT LEVEL (+4/-10 Db) | | Power Requirements | 120 V, 60 Hz, 15 W | | Dimensions (W x D x H) | 480 x 227.9 x 45 mm
(18.9" x 9" x 1.8") | | Weight | 3.5 kg (7.7 lb.) |
|
