Home Products Live Sound Analog Mixers Small Format Mixers

MG Series Mixers

Small Format Analog Mixers

Share Print

Buy Now From An Authorized Yamaha Internet Retailer

Available options for the MG Series Mixers:

MG102C

10-Channel Mixing Console

MG124C

12-Channel Mixing Console

MG124CX

12-Channel Mixing Console

MG166C

16-Channel Mixing Console

MG166CUSB

16-Channel USB Mixing Console

MG166CX

16-Channel Mixing Console

MG166CXUSB

16-Channel USB Mixing Console

MG206C

20-Channel Mixing Console

MG206CUSB

20-Channel USB Mixing Console

MG24/14FX

24-Channel Mixing Console

MG32/14FX

32-Channel Mixing Console

MG82CX

8-Channel Mixing Console

A full mixer line from just the basics to serious capacity for sound reinforcement & installations

Models Include:

MG102C, MG124C, MG166C, MG206C, MG82CX, MG124CX, MG166CX, MG166C-USB, MG166CX-USB, MG206C-USB, MG24/14FX and MG32/14FX

Find a Dealer

	MG102C		MG124C	MG166C	MG206C
Total Harmonic Distortion	Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT)
Frequency Response	0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT)
Hum & Noise ^*1	-128 dBu Equivalent Input Noise/-100 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω, Input Gain = Maximum		-128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω, Input Gain = Maximum
INPUT Connectors	MIC: 4, LINE: 2 mono + 4 stereo, CH INSERT: 2, RETURN: 1 stereo, 2TR IN: 1stereo		MIC: 6, LINE: 4 mono + 4 stereo, CH INSERT: 4, AUX RTN: 1 stereo, 2TR IN: 1	MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1	MIC: 16, LINE: 12 mono + 4 stereo, CH INSERT: 12, AUX RTN: 2 stereo, 2TR IN: 1
OUTPUT Connectors	ST: 1, AUX SEND: 1, CH INSERT: 2, REC: 1 stereo, MONITOR: 1 stereo, Phone: 1		ST: 2, AUX SEND: 2, CH INSERT: 4, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 2 Phone: 1	ST: 2, AUX SEND: 3, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1	ST: 2, AUX SEND: 4, CH INSERT: 12, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1
Crosstalk *2		-70 dB @ 1 kHz
Phantom Power		+ 48 V
Input HPF	CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct		CH 1-4, CH 5/6-7/8, 80Hz, 12dB/oct	CH 1-8, CH 9/10-11/12, 80Hz, 12dB/oct	CH 1-12, CH 13/14-19/20, 80Hz, 12dB/oct
CH EQ (MONO) 3 ±15 dB (Max.)*	High	10 k Hz: shelving		10 k Hz: shelving
	Mid	2.5 k Hz: peaking		2.5 k Hz: peaking
	Low	100 k Hz: shelving		100 k Hz: shelving
CH EQ (STEREO) 3 ±15 dB (Max.)*	High	10 k Hz: shelving		10 k Hz: shelving
	Mid	—		2.5 k Hz: peaking
	Low	100 Hz: shelving		100 Hz: shelving
Compressor (COMP)		control x 1 (Gain / Threshold / Ratio), CH 1-2	control x 1 (Gain / Threshold / Ratio), CH 1-4	control x 1 (Gain / Threshold / Ratio), CH 1-6	control x 1 (Gain / Threshold / Ratio), CH 1-8
Internal Digital Effect		—	—	—	—
LED Level Meter Pre MONITOR Level		2 x 7 points LED meter (PEAK, +6, +3, 0, -5, -10, -20 dB) PEAK lights if the signal comes within 3 dB of the clipping level.	2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB) PEAK lights if the signal comes within 3 dB of the clipping level.
PEAK Indicator		Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu).
USB Audio USB IN/OUT		—	—	—	—
Power Supply Adapter		PA-10: AC 38VCT, 0.62A, Cable Length = 3.6m	PA-20: AC 35VCT, 0.94A, Cable Length = 3.6m	PA-30: AC 35VCT, 1.4A, Cable Length = 3.6m	PA-30: AC 35VCT, 1.4A, Cable Length = 3.6m
Power Consumption		21 W	30 W	30 W	30 W
Dimensions (W x H x D)		256.6 mm x 62.2 mm x 302.5 mm	346.2 mm x 86.1 mm x 436.6 mm	478 mm x 105 mm x 496 mm	478 mm x 105 mm x 496 mm
Net Weight		1.5 kg	3 kg	5.3 kg	6.0 kg
Options		Microphone Stand Adaptor (BMS-10A)	—	—	—

*1 Hum & Noise are measured with a 6 dB/octave filter @ 12.7 kHz;equivalent to a 20 kHz filter with infinite dB/octave
attenuation.
*2 STEREO L/R, CH 1-2, PAN panned Hard left or right @1kHz.
*3 Turn over /roll-off frequency of shelving : 3 dB below maximum variable level.

		MG82CX	MG124CX	MG166CX
Total Harmonic Distortion		Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT)
Frequency Response		0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT)
Hum & Noise ^*1		-128 dBu Equivalent Input Noise/ -100 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω, Input Gain = Maximum	-128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω, Input Gain = Maximum
INPUT Connectors		MIC: 4, LINE: 2 mono + 4 stereo, CH INSERT: 2, RETURN: 1 stereo, 2TR IN: 1 stereo	MIC: 6, LINE: 4 mono + 4 stereo, CH INSERT: 4, AUX RTN: 1 stereo, 2TR IN: 1	MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1
OUTPUT Connectors		ST: 1, EFFECT SEND: 1, CH INSERT: 2, REC: 1 stereo, MONITOR: 1 stereo, Phone: 1	ST: 2, AUX SEND: 1, EFFECT SEND: 1, CH INSERT: 4, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 2 Phone: 1	ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1
Crosstalk *2		-70 dB @ 1 kHz
Phantom Power		+ 48 V
Input HPF		CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct	CH 1-4, CH 5/6-7/8, 80Hz, 12dB/oct	CH 1-8, CH 9/10-11/12, 80Hz, 12dB/oct
CH EQ (MONO) 3 ±15 dB (Max.)*	High	10 k Hz: shelving
	Mid	2.5 k Hz: peaking
	Low	100 Hz: shelving
CH EQ (STEREO) 3 ±15 dB (Max.)*	High	10 k Hz: shelving
	Mid	—
	Low	100 Hz: shelving
Compressor (COMP)		control x 1 (Gain/Threshold/Ratio), CH 1-2	control x 1 (Gain/Threshold/Ratio), CH 1-4	control x 1 (Gain/Threshold/Ratio), CH 1-6
Internal Digital Effect		16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off)
LED Level Meter Pre MONITOR Level		2 x 7 points LED meter (PEAK, +6, +3, 0, -5, -10, -20 dB) PEAK lights if the signal comes within 3 dB of the clipping level.	2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB) PEAK lights if the signal comes within 3 dB of the clipping level.
PEAK Indicator		Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu).
USB Audio USB IN/OUT		—	—	—
Power Supply Adapter		PA-10: AC 38VCT, 0.62A, Cable Length = 3.6m	PA-20: AC 35VCT, 0.94A, Cable Length = 3.6m	PA-30: AC 35VCT, 1.4A, Cable Length = 3.6m
Power Consumption		21 W	30 W	35 W
Dimensions (W x H x D)		256.6 mm x 62.2 mm x 302.5 mm	346.2 mm x 86.1 mm x 436.6 mm	478 mm x 105 mm x 496 mm
Net Weight		1.6 kg	3.2 kg	5.5 kg
Options		Microphone Stand Adaptor (BMS-10A), Foot Switch (FC-5)	Foot Switch (FC-5)	Foot Switch (FC-5)

*1 Hum & Noise are measured with a 6 dB/octave filter @ 12.7 kHz; equivalent to a 20 kHz filter with infinite dB/octave attenuation.
*2 STEREO L/R, CH 1-2, PAN panned Hard left or right @1kHz.
*3 Turn over /roll-off frequency of shelving: 3 dB below maximum variable level.

		MG166-C-USB	MG166CX-USB	MG206C-USB
Total Harmonic Distortion		Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT)
Frequency Response		0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT)
Hum & Noise ^*1		-128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω, Input Gain = Maximum
INPUT Connectors		MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1	MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1	MIC: 16, LINE: 12 mono + 4 stereo, CH INSERT: 12, AUX RTN: 2 stereo, 2TR IN: 1
OUTPUT Connectors		ST: 2, AUX SEND: 3, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1	ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1	ST: 2, AUX SEND: 4, CH INSERT: 12, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1
Crosstalk *2		-70 dB @ 1 kHz
Phantom Power		+ 48 V
Input HPF		CH 1-8, CH 9/10-11/12, 80Hz, 12dB/oct	CH 1-8, CH 9/10-11/12, 80Hz, 12dB/oct	CH 1-12, CH 13/14-19/20, 80Hz, 12dB/oct
CH EQ (MONO) 3 ±15 dB (Max.)*	High	10 k Hz: shelving
	Mid	2.5 k Hz: peaking
	Low	100 Hz: shelving
CH EQ (STEREO) 3 ±15 dB (Max.)*	High	10 k Hz: shelving
	Mid	2.5 k Hz: peaking
	Low	100 Hz: shelving
Compressor (COMP)		control x 1 (Gain/Threshold/Ratio), CH 1-6	control x 1 (Gain/Threshold/Ratio), CH 1-6	control x 1 (Gain/Threshold/Ratio), CH 1-8
Internal Digital Effect		—	16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off)	—
LED Level Meter Pre MONITOR Level		2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB) PEAK lights if the signal comes within 3 dB of the clipping level.
PEAK Indicator		Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu).
USB Audio USB IN/OUT		Sampling Frequency = 44.1kHz or 48kHz (depend on the application of PC)
Power Supply Adapter		PA-30: AC 35VCT, 1.4A, Cable Length = 3.6m	PA-30: AC 35VCT, 1.4A, Cable Length = 3.6m	PA-30: AC 35VCT, 1.4A, Cable Length = 3.6m
Power Consumption		30 W	35 W	40 W
Dimensions (W x H x D)		478 mm x 105 mm x 496 mm	478 mm x 105 mm x 496 mm	478 mm x 105 mm x 496 mm
Net Weight		5.3 kg	5.5 kg	6.0 kg
Options		—	Foot Switch (FC-5)	—

*1 Hum & Noise are measured with a 6 dB/octave filter @ 12.7 kHz; equivalent to a 20 kHz filter with infinite dB/octave attenuation.
*2 STEREO L/R, CH 1-2, PAN panned Hard left or right @1kHz.
*3 Turn over /roll-off frequency of shelving: 3 dB below maximum variable level.

		MG24/14FX	MG32/14FX
Total Harmonic Distortion		Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dB 600 Ω (ST OUT)
Frequency Response		0 +1, -3 dB 20 Hz - 20 kHz @ +4 dB 600 Ω (ST OUT)
*Input Hum & Noise^1**		-128dB 20 Hz - 20 kHz, Rs=150 Ω, Input Gain=Maximum, Input Pad =OFF, Input sensitivity=-60 dB
Crosstalk		-70dB @ 1kHz
CH Input	Mic	16+1 (Input A 1 - 16, Talk Back: XLR)	24+1 (Input A 1 - 24, Talk Back: XLR)
	Line	16 (Input B 1 - 16: TRS)	24 (Input B 1 - 24: TRS)
	Stereo	2 (Ch 17 18, 19 - 20:TRS) * Ch17, 19:L (MONO) 2 (Ch 21 22, 23 - 24: TRS/RCA)	2 (Ch 25 - 26, 27 - 28:TRS) * Ch25, 27:L (MONO) 2 (Ch 29 - 30, 31 - 32: TRS/RCA)
	Insert I/O	16 (Ch 1 - 16: TRS T: Out, R: In, S: Gnd)	24 (Ch 1 - 24: TRS T: Out, R: In, S: Gnd)
AUX	Send	6 (1 - 2/Post-Pre selectable, 3 - 4/Post-Pre selectable, 5 - 6/Post: TRS)
	Return	2 Stereo Sub In (L/MONO, R: TRS)
EFFECT	Send	2 (1, 2: TRS)
2TR	In	1 Stereo (L, R: RCA)
STEREO	Insert	1 Stereo (L, R: TRS)
GROUP	Insert	4 (1 - 4: TRS)
REC	Out	1 Stereo (L, R: RCA)
ST	Out	1 Stereo (L, R: XLR)
MONO	Out	1 (XLR)
ST SUB	Out	1 Stereo (L, R: TRS)
GROUP	Out	4 (1 - 4: TRS)
Phones		1 (TRS Stereo)
Phantom Power		+ 48 V
CH & ST Ch Input Gain Control		44 dB valiable
CH & ST High Pass Filter		80 Hz 12 dB/Octave
CH EQ (MONO)^*2 -15 dB (Max.)	High	10 kHz (Shelving)
	Mid	0.25-5 kHz (Peaking)
	Low	100 Hz (Shelving)
CH EQ (STEREO)^*2 -15 dB (Max.)	High	10 kHz (Shelving)
	Hi-Mid	3 kHz (Peaking)
	Low-Mid	800 Hz (Peaking)
	Low	100 Hz (Shelving)
MONO Out Low Pass Filter		80 - 120 Hz 12dB/octave
Internal Digital Effect		SPX x 2 (Effect 1: 16 Programs, Effect 2: 16 Programs :Parameter Control)
Dimensions	Width	33.54"	41.73"
	Depth	21.25"	21.25"
	Height	5.90"	5.90"
Weight		46.29 lbs.	52.91 lbs.
Power Requirements		UL/CSA: 60 W 120 V/60 Hz	UL/CSA: 75 W 120 V/60 Hz

* 1 Hum & Noise are measured with a 6 dB/octave filter @ 12.7 kHz; equivalent to a 20 kHz filter with
infinite dB/octave attenuation.
* 2 Turn over /roll-off frequency of shelving: 3 dB below maximum variable level.

Catalogs & Literature

Product Registration

Buy Parts & LogoWear

Quick Links

MG Series Mixers

Small Format Analog Mixers

Block Diagram

Brochure

Dimensions