Downloads for PJP-25UR

PJP-25UR Firmware Updater (Firmware ver.1.19 / Controller ver.1.23)

【Important】
To use the firmware Ver.1.19, PJP-25UR Controller must be updated to Ver.1.23. By downloading and running the above-mentioned updater, "the firmware and PJP-25UR Controller" can be updated simultaneously. If PJP-25UR Controller is Ver.1.21 or older, it is not possible to update the firmware to Ver.1.19 or later versions.

Firmware Version 1.19 (updated: Jan. 13, 2009)

The behavior stability has been improved when using simultaneously with other USB devices which require a lot of frequency.

When using the control application, Ver.1.21 or older versions are not usable.

The main unit restarts by changing the mode between “Mic & Speaker” and “Speaker” on the control application.

When switching the mode between "Mic & Speaker" and "Speaker", connection failure to active applications (e.g. Web conference system, media player) or behavior failure may occur. Close the applications beforehand.

- While “Wide” or “Mono” is selected in the “Speaker” mode, if the mode is changed to “Mic & Speaker”, and then returned to “Speaker”, “Stereo” is always selected.
- When “Mic & Speaker / Speaker” is assigned to the short cut function, if you disconnect the USB cable and then connect it again while the “Speaker” mode is selected, the unit starts with the “Speaker” mode.

When canceling the microphone mute function while the “Speaker” mode is selected, the main unit restarts.

PJP-25UR Updater

Updates / installs the firmware and control application of PJP-25UR.

If the control application has been already installed and firmware update is not required, it is possible to update only the control application.

PJP-25UR Controller application Version 1.23 (updated: Jan. 13, 2009)

When updating the firmware to Ver.1.19, also the controller application must be updated to Ver.1.23.

On the firmware Ver. 1.19 or later, the confirmation massage for restarting PJP-25UR appears, when switching the mode between “Mic & Speaker” and “Speaker”. The mode is changed only if an acceptance is obtained.

The confirmation massage appears when the following operations are performed.
    - when "Mic & Speaker" on the application is pressed
    - when "Speaker" on the application is pressed
    - when the mode has been changed on completion of the wizard on the application
    - when the microphone mute function is canceled on the application while the controller is in the "Speaker" mode
    * The massage does not appear when performing with the shortcut function of PJP-25UR or on the OS.

A dialog appears while PJP-25UR is restarting.
The dialog appears in the following cases.

<If the firmware of main unit is Ver.1.10-1.18>
    - when “Mic & Speaker Control via USB” is changed
    - when restart is required due to reset

<If the firmware of main unit is Ver.1.19>
    - when “Mic & Speaker” on the application is pressed
    - when “Speaker” on the application is pressed
    - when the “Speaker” mode is changed by using the shortcut function of the main unit
    - when “MIC MUTE” on the main unit or application is pressed while the controller is in the “ Speaker” mode
    - when the mode has been changed on the completion of the setting wizard

The dialog disappears when the window of controller is hidden or the control window is initialized due to the detection of PJP-25UR.

Version 1.17 (updated: Aug. 25, 2008)

Echo Canceller has been improved.

The “Environment” setting has been added. (The “Echo Canceller Effect” setting has been discontinued.)
- In the "Environment" setting, you can select between "Normal" and "Conference Room".
- Normal: Select this mode when using in an office or open space.
- Conference Room: Select this mode when using in a relatively quiet environment. This mode is highly-sensitive and picks up the audio from a larger area.

The “Environment” setting can now be configured by the keys of the PJP-25UR.
- Pressing MENU/PC and VOLUME – at the same time switches the “Environment” setting to "Normal" and the middle LED blinks for three seconds.
- Pressing MENU/PC and VOLUME + at the same time switches the environment setting to "Conference Room" and all the three LEDs blink for three seconds.

The microphone sensitivity has been optimized to make the audio clearer.
- The microphone sensitivity has been lowered in default configuration in order not to pick up the audio more than necessary.
- If you need the microphone sensitivity which is equivalent to 0dB of Ver. 1.13 or before, drug the slider bar to the following position in “Mic level” of the PJP-25UR Controller.
            - When using in "Normal": One scale (large dot) higher from the center
            - When using in "Conference Room": Near the center

For details, refer to “User’s Manual”.

Version 1.12 (updated: Mar. 4, 2008)

Improved sound quality: Echo Canceller
The Echo Canceller function has been improved.

Specification change: Microphone levels changed
Because the microphone gain is high, sound quality is sometimes compromised depending on the settings of the communication application (Web conferencing, etc.). To correct this problem, the microphone gain levels have been changed. As a result, the default pickup range setting may be slightly low. If so, the pickup range can be adjusted by raising the microphone levels using the microphone level adjustment of the PJP-25UR controller.
For details, see p12-13 in “User's Manual” and the “PJP-25UR Controller” help.

Added function: Microphone & speaker control via USB
It is now possible to adjust or select the PJP-25UR microphone and speaker levels from within the sound settings of the PC. The default setting is ON.
For details, see p12-13 in “User's Manual” and the “PJP-25UR Controller” help.

Added function: Microphone audio band selection
A microphone audio band selection function has been added.By selecting an appropriate audio band, communication applications (Web conferencing etc.) are enabled with optimal sound quality. The default setting is “Normal” (7 kHz band).
For details, see p12-13 in “User's Manual” and the “PJP-25UR Controller” help.

Added function: New speaker mode
A “Wide” mode has been added to the modes of sound reproduction from the speakers.
For details, see p12-13 in “User's Manual” and the “PJP-25UR Controller” help.

Added function: New firmware upgrade method
Once firmware (a bin file) has been downloaded to the PC, it can now be transferred to the PJP-25UR.
For details, see p19 in “User's Manual”

Version 1.04 (updated: Jan. 17, 2008)

Noise Canceller & Echo Canceller upgraded to improve overall sound quality.
Noise Canceller & Echo Canceller functions upgraded.

Specification changes made to the default settings of the Echo Canceller Mode
The Echo Canceller Mode default has been changed to Middle.

Version 1.02 (updated: Jan. 17, 2008)

Noise Canceller upgraded to improve overall sound quality.
Upgraded Noise Canceller functions.

Specification changes made to decrease audio output settings.
Audio output strength decreased 12dB.

Registered Date : 1/24/2013
Language : English
Size : 5.27 MB

Related Download

You are recommended to download these files.

License Agreement


ATTENTION

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").

BY DOWNLOADING OR INSTALLING THIS SOFTWARE OR OTHERWISE RENDERING IT AVAILABLE FOR YOUR USE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.

GRANT OF LICENSE AND COPYRIGHT

Yamaha hereby grants you the right to use the programs and data files composing the software accompanying this Agreement, and any programs and files for upgrading such software that may be distributed to you in the future with terms and conditions attached (collectively, “SOFTWARE”), only on a computer, musical instrument or equipment item that you yourself own or manage. While ownership of the storage media in which the SOFTWARE is stored rests with you, the SOFTWARE itself is owned by Yamaha and/or Yamaha’s licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions.

RESTRICTIONS

  • You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
  • You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
  • You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
  • You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
  • You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.

Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.


  • Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
  • Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
  • The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.

TERMINATION

If any copyright law or provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.

DOWNLOADED SOFTWARE

If you believe that the downloading process was faulty, you may contact Yamaha, and Yamaha shall permit you to re-download the SOFTWARE, provided that you first destroy any copies or partial copies of the SOFTWARE that you obtained through your previous download attempt. This permission to re-download shall not limit in any manner the disclaimer of warranty set forth in Section 5 below.

DISCLAIMER OF WARRANTY ON SOFTWARE

You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided "AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.

LIMITATION OF LIABILITY

YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE.

THIRD PARTY SOFTWARE

Third party software and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. If, in the written materials or the electronic data accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.


  • Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
  • Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
  • Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.

U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:

The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein

GENERAL

This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.

COMPLETE AGREEMENT

This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of Yamaha.