Search
Digital
DSP5D Digital Mixing System  
IMX644  
LS9 Digital Mixing Consoles  
DM2000 VCM  
M7CL Digital Mixing Console  
PM1DV2 Digital Audio Mixing System  
PM5D / PM5D-RH   
SB168-ES  
DM1000V2   
02R96V2  
01V96V2  
Analog
Rackmount
Powered
Audio Workstations
Related Products
DCU5D
DCU5D Digital Cabling Unit – NEW!
Simplify connections between PM5D and DSP5D with a standard Cat5 cable
Product Spotlight
PM5D DVD
Free Yamaha PM5D DVD
The most popular digital console in the world offers A - Z reference guide on DVD for FREE!
Commercial Audio   Products   Mixers   Digital   
OR
PM5D / PM5D-RH
PM5D-RHPM5D Digital Mixing Console for live applications with a choice of two configurations
Features  Specifications  Accessories  Software  Downloads  Dimensions  Panel Views  Brochure  
General Specifications
All faders are nominal when measured. Output impedance of signal generator: 150Ω
Internal Signal Processing 32-bit (Accumulator 58-bit)
Sampling Frequency Internal 44.1 kHz, 48kHz, 88.2kHz, 96kHz
External Normal rate: 44.1kHz (-10%) — 48kHz (+6%)
Double rate: 88.2kHz (-10%) — 96kHz (+6%)
Signal Delay Less Than 2.3ms INPUT to STEREO A, B (@ Fs = 48kHz)
Less Than 1.15ms INPUT to STEREO A, B (@ Fs = 96kHz)
Fader Motorized, Stroke: 100mm All Faders
Fader Resolution +10 – -138, -∞dB (1024 steps) All Faders
Total Harmonic Distortion


  Input Gain = Min.		 Less Than 0.05 % 20Hz – 20kHz @+4dBu into 600Ω
INPUT 1 – 48 ch to STEREO A,B OUT
(@Sampling frequency - 44.1kHz or 48kHz)
Less Than 0.05 % 20Hz – 40kHz @+4dBu into 600Ω
INPUT 1 – 48 ch to STEREO A,B OUT (@Sampling frequency = 96kHz)
Frequency Response PM5D 0.5, -1.5dB 20Hz – 20kHz @1kHz into 600Ω
INPUT 1 48 ch to STEREO A,B OUT
(@Sampling frequency = 44.1kHz or 48kHz)
0.5, -2dB 20Hz – 40kHz @1kHz into 600Ω
INPUT 1 – 48 ch to STEREO A,B OUT
(@Sampling frequency = 96kHz)
PM5D-RH 1.0, -3.0dB 20Hz 20kHz @1kHz into 600Ω
INPUT 1 – 48 ch to STEREO A,B OUT
(@Sampling frequency = 44.1kHz or 48kHz)
1.0, -3.0dB 20Hz – 40kHz @1kHz into 600Ω
INPUT 1 – 48 ch to STEREO A,B OUT
(@Sampling frequency = 96kHz)
Dynamic Range
(Max level to noise level)		 110 typ. DA Converter (STEREO A, B OUT)
(@Sampling frequency = 44.1kHz or 48kHz)
108 typ. AD + DA (to STEREO A, B OUT),
GAIN: Min., PAD: ON (@Sampling frequency = 44.1kHz or 48kHz)
110 typ. DA Converter (STEREO A, B OUT) (@Sampling frequency = 96kHz)
106 typ. AD + DA (to STEREO A, B OUT),
GAIN: Min., PAD: ON (@Sampling frequency= 96kHz)
Hum & Noise
 Rs = 150Ω
 Input Gain = Max.
 Input Pad = 0dB
 Input sensitivity = -60dB		 -128dBu Equivalent Input Noise (20Hz – 20kHz) STEREO A, B OUT
-86dBu Residual Output Noise, ST Master Off.
Maximum Voltage Gain
@ 1kHz		 84dB INPUT 1 – 48 to STEREO A, B OUT, Rs = 150., Input Gain: Max., PAD: Off
84dB INPUT 1 – 48 to MIX OUT/MATRIX OUT/CUE OUT/MONITOR OUT
(via STEREO Bus)
Crosstalk @ 1kHz -80dB Adjacent Input 1 – 48
-80dB Input to Output
Power Requirements PM5D 480W DC 24V 20A (Use PW800W Only)
PM5D-RH 600W DC 24V 25A (Use PW800W Only)
Dimensions W x D x H (mm) 1551 x 950 x 283
Net Weight PM5D: 98 kg PM5D-RH: 97 kg
Operation free-air
Temperature Range		  10 – 35 °C
Storage Temperature
Range		 -20 – 60 °C
* Input Gain = Min.
* Hum & Noise is measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with
infinite dB/octave attenuation.
* total Harmonic Distortion is measured with a 18dB/octave filter @ 80kHz
* Dynamic range is measured with a 6dB/octave filter @ 12.7kHz; equivalent to a 20kHz filter with
infinite dB/octave attenuation.

Libraries
Name Number Total
Scene Memory Preset 1 + User 500 501
Input Patch Library Preset 1 + User 99 100
Output Patch Library Preset 1 + User 99 100
Input Channel Library Preset 1 + User 199 200
Output Channel Library Preset 1 + User 199 200
Input EQ Library Preset 40 + User 159 199
Output EQ Library Preset 3 + User 196 199
GATE Library Preset 4 + User 195 199
COMP Library Preset 36 + User 163 199
Effect Library Preset 54 + User 145 199
GEQ Library Preset 1 + User 199 200
HA Library Preset 1 + User 199 200

Analog Input Characteristics  (PM5D)
Input Terminals PAD GAIN Actual
Load Imp.		 For Use With Nominal GAIN
SW *4		 Input Level Connector
Sensitivity Nominal Max. Before Clip
Input
1 – 48		 0 -60dB 3kΩ 50–600ΩMics &
600Ω Lines		 – -80dBu (0.0775mV) -60dBu (0.775mV) -40dBu (7.75mV) XLR-3-31 Type (Balanced) *2
-16dB -36dBu (12.3mV) -16dBu (123mV) +4dBu (1.23V)
26 -10dBu (245mV) +10dBu (2.45V) +30dBu (24.51V)
Stereo Input
1-4 [L, R]		 -34dB 4kΩ 600Ω Lines – -54dBu (1.55mV) -34dBu (15.5mV) -14dBu (155mV) XLR-3-31 Type (Balanced) *2
10dB -10dBu (245mV) +10dBu (2.54V) +30dBu (24.51V)
Insert In 1 – 48 10kΩ 600Ω Lines – -16dBu (123mV) +4dBu (1.23V) +24dBu (12.28V) Phone Jack (TRS) (Balanced) *3
2TR In Analog 1, 2
[L, R]		 10kΩ 600Ω Lines +24dB (default) -6dBu (388mV) +4dBu (1.23V) +24dBu (12.28V) XLR-3-31 Type (Balanced) *2
+18dB -12dBu (195mV) -2dBu (0.616V) +18dBu (6.16V)
Talkback 3kΩ 50–600Ω Mics & 600Ω Lines – -60dBu (0.775mV) -50dBu (2.45mV) -30dBu (24.5mV) XLR-3-31 Type (Balanced) *2

Analog Input Characteristics  (PM5D-RH)
Input Terminals GAIN Actual
Load Imp.		 For Use With Nominal GAIN
SW *4		 Input Level Connector
Sensitivity Nominal Max. Before Clip
Input
1 – 48		 -62dB 3kΩ 50–600Ω Mics &
600Ω Lines 		– -82dBu (61.6uV) -62dBu (0.616mV) -42dBu (6.16mV) XLR-3-31 Type (Balanced) *2
+10dB -10dBu (245mV) +10dBu (2.45V) +30dBu (24.5V)
Stereo Input
1-4 [L, R]		 -62dB 3kΩ 50–600Ω Mics &
600Ω Lines		 – -82dBu (61.6uV) -62dBu (0.616mV) -42dBu (6.16mV) XLR-3-31 Type (Balanced) *2
+10dB -10dBu (245mV) +10dBu (2.54V) +30dBu (24.5V)
2TR In Analog
1, 2 [L, R]		 10kΩ 600Ω Lines +24dB (default) -6dBu (388mV) +4dBu (1.23V) +24dBu (12.28V) XLR-3-31 Type (Balanced) *2
+18dB -12dBu (195mV) -2dBu (0.616V) +18dBu (6.16V)
Talkback 3kΩ 50–600Ω Mics & 600Ω Lines – -60dBu (0.775mV) -50dBu (2.45mV) -30dBu (24.5mV) XLR-3-31 Type (Balanced) *2
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain. (All faders and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced. (1 = GND, 2 = HOT, 3 = COLD)
*3. Phone jacks are balanced. (Tip = HOT, Ring = COLD, Sleeve = GND)
*4. There are switches inside the body to preset the maximum input level.
  • In these specifications, 0dBu = 0.775 V rms.
  • All input AD converters are 24bit linear, 128times (@48kHz) oversampling.
  • +48V DC (phantom power) is supplied to INPUT (1 – 48) XLR type connectors via each individual switch.
    		•

    Analog Output Characteristics
    Output Terminals Actual
    Source Imp.    		 For Use With Nominal GAIN
    SW *4    		 Output Level Connector
    Nominal Max. Before Clip
    Stereo A, B [L, R] 150kΩ 600Ω Lines +24dB (default) +4dBu (1.23 V) +24dBu (12.28 V) XLR-3-32 Type (Balanced) *1
    +18dB -2dBu (616mV) +18dBu (6.16V)
    Monitor Out [L, R, C] 150Ω 600Ω Lines +24dB (default) +4dBu (1.23 V) +24dBu (12.28 V) XLR-3-32 Type (Balanced) *1
    +18dB -2dBu (616mV) +18dBu (6.16V)
    Cue Out [L, R] 150Ω 600Ω Lines +24dB (default) +4dBu (1.23 V) +24dBu (12.28 V) XLR-3-32 Type (Balanced) *1
    +18dB -2dBu (616mV) +18dBu (6.16V)
    Matrix Out
    1 – 8    		 150Ω 600Ω Lines +24dB (default) +4dBu (1.23 V) +24dBu (12.28 V) XLR-3-32 Type (Balanced) *1
    +18dB -2dBu (616mV) +18dBu (6,16V)
    Mix Out
    1 – 24    		 150Ω 600Ω Lines +24dB (default) +4dBu (1.23 V) +24dBu (12.28 V) XLR-3-32 Type (Balanced) *1
    +18dB -2dBu (616mV) +18dBu (6,16V)
    Insert Out
    1 – 48    		 150Ω 10Ω Lines – +4dBu (1.23 V) +24dBu (12.28 V) Phone Jack (TRS) (Balanced) *2 *5
    Phones (x2) 15Ω 8Ω Lines – 75mW (*6) 150mW Stereo Phone Jack (TRS) (Unbalanced) *3
    40Ω Phones 65mW (*6) 150mW
    *1. XLR-3-32 type connectors are balanced. (1 = GND, 2 = HOT, 3 = COLD)
    *2. Phone jack are balanced. (Tip = HOT, Ring = COLD, Sleeve = GND)
    *3. PHONES stereo phone jack is unbalanced. (Tip = LEFT, ring = RIGHT, Sleeve = GND)
    *4. There are switches inside the body to preset the maximum output level.
    *5. INSERT OUTs are only provided for PM5D
    *6. The position of the level control is 10dB lowered from Max.
  • In these specifications, 0dBu = 0.775 V rms.
  • All output DA converters are 24bit, 128times (@48kHz) oversampling.
    		•

    Digital Input Characteristics
    Terminal     Format Data
    Length    		 Level Connector
    2TR IN
    DIGITAL (*2)    		 1 AES/BU AES/BU 24bit RS422 XLR-3-31 Type (Balanced) *1
    2 AES/BU AES/BU 24bit RS422 XLR-3-31 Type (Balanced) *1
    3 COAXIAL IEC-60958 24bit 0.5Vpp/75Ω RCA Pin Jack
    CASCADE IN – – RS422 D-Sub Half Pitch Connector 68P (Female)
    *1. XLR-3-31 type connectors are balanced. (1 = GND, 2 = HOT, 3 = COLD)
    *2. With Sampling Rate Converter

    Digital Output Characteristics
    Terminal     Format Data
    Length    		 Level Connector
    2TR OUT
    DIGITAL (*3)    		 1 AES/BU AES/BU
    Professional Use    		 24bit *1 RS422 XLR-3-32 Type (Balanced) *2
    2 AES/BU AES/BU
    Professional Use    		 24bit *1   XLR-3-32 Type (Balanced) *2
    3 COAXIAL IEC-60958
    Consumer Use    		 24bit *1 0.5Vpp/75Ω RCA Pin Jack
    CASCADE OUT – – RS422 D-Sub Half Pitch Connector 68P (Female)
    *1. Dither: word length 16/20/24 bit
    *2. XLR-3-32 type connectors are balanced. (1 = GND, 2 = HOT, 3 = COLD
    *3. With sampling Rate Converter

    SLOT (1-4) Characteristics
    Each I/O SLOT accepts a Digital Interface card.
    Only SLOT1 has a Serial Interface.
    Card Name Function Input Output No. of
    Usable Cards
    MY4-AD Analog In 4 In – 4
    MY8-AD24 Analog In 8 In – 4
    MY8-AD96 Analog In 8 In – 4
    MY4-DA Analog Out – 4 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4
    MY8-DA96 Analog Out – 8 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4
    MY8-AE96 AES/EBU 8 In 8 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4
    MY8-AE96S AES/EBU 8 In 8 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4
    MY8-AT ADAT 8 In 8 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4
    MY8-TD TASCAM 8 In 8 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4
    MY8-AE AES/EBU 8 In 8 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4
    MY16-AT ADAT 16 In 16 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4
    MY16-TD TASCAM 16 In 16 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4
    MY16-AE AES/EBU 16 In 16 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4
    MY16-C CobraNet™ 16 In 16 OUT (Mix, Stereo, Direct, Ext Insert, Monitor, Cue, OSC, TB) 4

    PW800W General Specifications
    Power Requirements   100 – 240V, 50/60Hz 1000W (Max.)
    Dimensions W x H x D (mm) 480 x 132 (=3U) x 355
    DC Output Voltage 24V
      Current 23A (Max.)
    Net Weight   10kg
    Operation Temperature   10 – 35 °C
    Storage Temperature   -20 – 60 °C

    Output Characteristics
    OUTPUT TERMINAL FORMAT LEVEL CONNECTOR
    DC OUTPUT – DC 24V JL05-2A22-14PC 24pin (Male)
    Specifications and appearance are subject to change without notice.
    All trademarks and registered trademarks are property of their respective owners.
    Home | Products | News | Training | Locate a Dealer | Service & Support
    Yamaha Corporation of America | About Yamaha | Careers | Warranty/Safety Information | Privacy Policy
    © 2009 Yamaha Commercial Audio Systems, Inc. All rights reserved. Terms of Use and Copyright Notice