| General Specifications |
T5n |
T4n |
T3n |
| Output Power (W) |
120V(US) |
230V(EU) |
120V(US) |
230V(EU) |
120V(US) |
230V(EU) |
| |
1kHz
THD+N=1% |
2Ω per channel |
2500 |
2500 |
2200 |
2200 |
1900 |
1900 |
| 4Ω per channel |
2200 |
2300 |
1950 |
2050 |
1400 |
1400 |
| 8Ω per channel |
1350 |
1350 |
1150 |
1150 |
800 |
800 |
4Ω bridge |
5000 |
5000 |
4400 |
4400 |
3800 |
3800 |
| 8Ω bridge |
4400 |
4600 |
3900 |
4100 |
2800 |
2800 |
1kHz
20mS burst |
2Ω per channel |
3400 |
3400 |
2900 |
3100 |
2200 |
2150 |
| 4Ω per channel |
2200 |
2300 |
1950 |
2050 |
1400 |
1400 |
| 8Ω per channel |
1350 |
1350 |
1150 |
1150 |
800 |
800 |
| 4Ω bridge |
6800 |
6800 |
5800 |
6200 |
4400 |
4300 |
| 8Ω bridge |
4400 |
4600 |
3900 |
4100 |
2800 |
2800 |
| SN ratio |
20Hz-20kHz |
(DIN AUDIO) |
107dB |
106dB |
105dB |
| Power consumption (W) |
Stand-by |
5 |
5 |
5 |
| Idle |
70 |
70 |
70 |
| 1/8 (2Ω/Pink noise) |
1600 |
1600 |
1400 |
1400 |
1200 |
1200 |
| All Models |
| THD+N |
20Hz-20kHz,
Half Power RL-4Ω, 8Ω |
0.1% |
| Intermodulation Distortion 60Hz:
7kHz, 4:1, Half Power |
0.1% |
Frequency response
RL=8Ω,Po=1W,HPF=OFF
20Hz-20kHz |
|
0dB |
| 0dB |
| 6dB |
ChannelHalf
Power RL=8Ω,1kHz
SeparationAtt. max input 600Ω shunt |
70dB |
Residual Noise Att,min 20Hz-20kHz(DIN
AUDIO) |
-70dBu |
| Damping factorRL=8Ω 1kHz |
800 |
| Voltage GainAtt.max |
26dB |
| Maximum Input Voltage |
+24dBu |
| Input Impedence |
20kΩ (balance)
10kΩ (unbalance) |
| Controls |
Front Panel |
POWER switch(push on/push off)
attenuator (31 position) x2 |
| Rear Panel |
MODE switch
(STEREO/BRIDGE/PARALLEL) X1 |
HPF switch
(20Hz/OFF 12dB/oct) x1 |
AMP ID switch
(6PDIP) x1 |
| Connectors |
Input |
XLR-3-31 type/ch |
Euroblock connector
(balance)/ch |
| Output |
SPEAKON/ch, 5way biding postx1 |
| DATA PORT |
RJ45x2 |
| Indicators |
POWER/STANDBY |
x1 (Green/Orange) |
| REMOTE |
x1 (Green) |
| PROTECTION |
x1 (Red) |
| TEMP |
x1 (Red) heatsink temp
85°C |
| SIGNAL |
x2 (Green) |
| MUTE |
x2 (Red) |
| CLIP/LIMIT |
x2 (Red) |
| Load protection |
POWER switch on/off mute |
| DC-fault: power supply shutdown / do not return automatically. |
clip limiting: THD  0.5% |
| Amplifier protection |
thermal: cut the output (heatsink
temp 90°C) return automatically. |
VI limiter (RL  1Ω):
Limit the output |
| Power supply protection |
thermal: power supply shutdown (heatsink temp 100°C) do not return. |
| Cooling |
Variable-speed fan: x2 |
| Power requirements |
US&CANADA: 120V/60Hz |
EUROPE: 230V/50Hz |
| Dimensions (WxHxD) |
480 x 88 x 456mm (2U) |
| Weight |
14.0kg |
| 
