LS9 Digital Mixing Console

Search


	Digital

	DSP5D Digital Mixing System

	IMX644

	LS9 Digital Mixing Consoles

	DM2000 VCM

	M7CL Digital Mixing Console

	PM1DV2 Digital Audio Mixing System

	PM5D / PM5D-RH

	SB168-ES

	DM1000V2

	02R96V2

	01V96V2

	Analog

	Rackmount

	Powered

	Audio Workstations

Commercial Audio

Products

Mixers

Digital


	LS9 Digital Mixing Consoles


			Digital Mixing Console comes with 2 models: LS9-16 and LS9-32 Adobe Reader Required

Enlarge Picture


	Features Specifications Accessories Dimensions Panel Views Brochure

General Specifications
Sampling Frequency	Internal: 44.1kHz, 48kHz External: 39.69 - 50.88kHz
Fader	100mm motorized x33 <LS9-32> , x17 <LS9-16>
LCD Display	320 x 240 dots Graphic Color LCD
Phantom Power	48V
Dimensions (W x H x D mm)	LS9-32: 884 x 220 x 500 LS9-16: 480 x 220 x 500
Net Weight	LS9-32: 19.4kg LS9-16: 12kg
Power Requirements	LS9-32: 170 W, 110-240 V, 50/60 Hz LS9-16: 95 W, 110-240 V, 50/60 Hz
Temperature Range Operation free-air	+10°C to +35°C
Storage Temperature Range	-20°C to +60°C

Analog Input Characteristics
Input Terminals	GAIN	Actual Load Impedance	For Use With Nominal	Input Level			Connector
				Sensitivity *1	Nominal	Max. before clip
INPUT 1-16 <LS9-16> INPUT 1-32 <LS9-32>	-62dB +10dB	3kΩ	50-600Ω Mics & 600Ω Lines	-82dBu (61.6µV)	-62dBu (0.616mV)	-42dBu (6.16mV)	XLR-3-31 type with latch(Balanced)
				-10dBu (245mV)	+10dBu (2.45V)	+30dBu (24.5V)

*1. Sensitivity is the lowest level that will produce an output of +4dBu(1.23V) or the nominal output level when the unit is set to maximum gain. (all faders and level controls are maximum position.)
*2. In these specifications, 0dBu = 0.775 Vrms.
*3. All input AD converters are 24bit linear, 128times oversampling.
*4. +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch.

Analog Output Characteristics
Output Terminals	Actual Source Imp.	For Use With Nominal	GAIN SW *5	Output Level		Connector
				Nominal	Max. before clip
OMNI OUT 1-8 <LS9-16> OMNI OUT 1-16 <LS9-32>	75Ω	600Ω Lines	+24dB (default)	+4dBu (1.23 V)	+24dBu (12.3 V)	XLR-3-32 Type (Balanced) *1
			+18dB	-2dBu (616mV)	+18dBu (6.16V)
PHONES OUT	15Ω	8Ω Phones	–	75mW	150mW	Stereo Phone Jack (TRS) (Unbalanced) *²
		40Ω Phones	–	65mW	150mW

*1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )
*2. PHONES stereo phone jack is unbalanced.( Tip=LEFT, Ring=RIGHT, Sleeve=GND )
*3. In these specifications, 0dBu = 0.775 Vrms.
*4. All output DA converters are 24bit, 128times oversampling.
*5. There are switches inside the body to preset the maximum output level.

Digital Input Characteristics
Terminal		Format	Data Length	Level	Connector
2TR IN DIGITAL	COAXIAL	IEC-60958	24bit	0.5Vpp/75Ω	RCA Pin Jack

Digital Output Characteristics
Terminal		Format	Data Length	Level	Connector
2TR OUT DIGITAL	COAXIAL	IEC-60958 Consumer Use	24bit	0.5Vpp/75Ω	RCA Pin Jack